澳标
美标
美标
美标
美标
英标
台湾
德标
欧标
国标
俄标
航空
航天
美标
国际
机械行业
日标
韩标
法国
建筑
汽标代号
意大利
印标
石化
铁道部
化工
电力
压铆件
军标
浙江制造团体标准
深圳紧固件行业协会标准
浙工大
压力容器
船舶
原化工部
原电子工业部
能源行业标准
汽车行业标准
西门子
万禧
形状和位置公差 未注公差值
Geometrical tolerancing - Geometrical tolerance for features wlthout individual tolerance indications
螺纹钢紧固件的技术供应条件:第2部分 紧固件公差 - 螺栓、螺钉和螺母 产品等级A、B和C
Technical Supply Conditions For Threaded Steel Fasteners - Part 2 Tolerances For Fasteners - Bolts, Screws, studs And Nuts - Product Grades A, B And C
美制螺栓和螺钉公称长度L 公差
Length tolerances for bolts
紧固件公差 - 产品等级 F级,螺纹直径1~3mm用于精密机械的螺栓、螺钉和螺母
Tolerances for fasteners - Part 2 : Bolts, screws and nuts with thread diameters from 1 up to 3 mm and product grade F, for fine mechanics
形状和位置公差 未注公差值
Geometrical tolerancing - Geometrical tolerance for features wlthout individual tolerance indications
一般公差 未注长度与角度公差
General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
紧固件公差 Part1:螺栓、螺钉、螺柱和螺母 产品等级 A、B和 C级
Tolerances for fasteners— Part1:Bolts,screws,studs and nuts—Product grades A,B and C
紧固件公差 3: 螺栓、螺钉和螺母用平垫圈, 产品等级为A, C和F级
Tolerances for fasteners - Part 3: Plain washers for bolts,screw and nuts - Product grades A, C and F
紧固件公差 - 用于精密机械的螺栓、螺钉和螺母
Tolerances for fasteners Bolts 、screws and nuts for fine mechanics
产品几何技术规范(GPS)线性尺寸公差ISO代号体系第1部分:公差、偏差和配合的基础 (ISO 286-1:2010,MOD))
Geometrical Product Specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits
紧固件公差 平垫圈
Tolerances for fasteners-Plain washers
未注公差的线性和角度尺寸的公差
紧固件公差(螺栓、螺柱、螺钉和螺母)
Tolerances for fasteners - Bolts,screws,studs and nuts
圆锥公差
Cone Tolerance
紧固件公差 -200℃~+700℃使用的螺栓-螺母连接副
Tolerences for fasteners-Bolt/nut assemblies for service temperatures from -200℃~+700℃
钢质模锻件 公差及机械加工余量
Steel die forgings - Tolerance and machining allowance
紧固件公差 平垫圈
Torlerances for fasteners - Plain washers
产品几何技术规范(GPS) 线性尺寸公差ISO代号体系 第2部分:标准公差带代号和孔、轴的极限偏差表 (ISO 286-2:2010, MOD))
Geometrical product specifications ( GPS ) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts