澳标
美标
美标
美标
美标
英标
台湾
德标
欧标
国标
俄标
航空
航天
美标
国际
机械行业
日标
韩标
法国
建筑
汽标代号
意大利
印标
石化
铁道部
化工
电力
压铆件
军标
浙江制造团体标准
深圳紧固件行业协会标准
浙工大
压力容器
船舶
原化工部
原电子工业部
能源行业标准
汽车行业标准
西门子
万禧
英制T型和D型切削螺纹(统一螺纹) [TABLE 7]
Thread and point details for types D and T thread cutting screws (unified form threads) [TABLE 7]
英制自攻螺纹AB型, B型末端以及BT型切削螺纹 [TABLE 5]
Thread and point details for Type AB and B thread forming screws and Type BT thread cutting screws [TABLE 5]
高低牙自攻螺纹
BT型 自攻牙
AB和B型自攻螺纹
Threads and thread ends for tapping screws
BP型 自攻牙
D型 自切自攻螺纹
Triangle lock self-tapping teeth--D、F、G
BF型 自攻牙
Self-tapping teeth-BF
B型 自攻牙
self-tapping teeth-B
AB自攻牙
AB self-tapping teeth
Lag 木螺纹-table16
Lag screw threads
自攻螺钉的抗扭强度 [Table 50]
Torsional Strength Requirements for Tapping Screws
自挤自攻螺钉的最大扭矩 [Table 49]
Maximum Drive Torque for Type TRS Tapping Screws
自攻螺钉拧入性试验用标准试验板厚度和孔径 [Table 48]
Standard Test-Plate Thickness and Hole Sizes for Drive-Test Inspection of Tapping Screws
A、AB、B、BF、BP以及BT型自攻螺钉的螺纹长度 [Table 46]
Thread Lengths for Type A, AB, B, BF, BP and BT Tapping Screws
自挤自攻【TRS型】螺纹和末端 [Table 45]
Dimensions of Type TRS Tapping Screws
D, F, G, T 型自攻螺钉 螺纹和末端 [Table 44]
Dimensions of Threads and Points for Type D, F, G, and T Thread-Cutting Tapping Screws
BF型 BT型 自切自攻螺钉螺纹和末端 [Table 43]
Dimensions of Threads and Points for Types BF and BT Thread-Cutting Tapping Screws
A型自攻螺钉螺纹和末端 [Table 42]
Dimensions of Threads and Points for Type A Thread-Forming Tapping Screws
B型 BP型自攻螺钉螺纹和末端 [Table 41]
Dimensions of Threads and Points for Type B and BP Thread-Forming Tapping Screws
AB型和ABR型自攻螺纹和末端 [Table 40]
Dimensions of Threads and Points for Type AB and Type ABR Thread-forming Screws
米制自攻螺纹尾端
Metric Self-tapping Thread End
米制自切自攻螺纹尾端
Metric triangle lock with thread end
木螺钉 - 螺纹及末端
Thread and thread ends for wood screws
ISO - 公制梯形螺纹
ISO - Metric Trapezoidal Screw Threads
米制三角锁紧螺纹P型
Metric triangle lock thread-P type
安装钢丝螺套用内螺纹
米制三角锁紧螺纹B型
Metric triangle lock thread-B type
米制三角锁紧螺纹C型
Metric triangle lock thread-C type
米制三角锁紧螺纹S型
Metric triangle lock thread-S type
美制三角锁紧螺纹S型
US triangle lock thread-S type
SM针车用螺纹(60°牙尖角)
SM pin thread for motor
自攻螺纹及尾端
Tapping Screw Threads and Ends
米制粗螺纹的尺寸和公差限值
Limits of sizes and tolerances for metric coarse screw threads
自攻螺纹及尾端
Tapping screw threads and ends
自攻螺纹及尾端
Tapping Screw Threads and Ends
30°楔形防松螺纹
Locking Thread with 30° wedge ramp
T型 自攻自切螺钉
英制A型自攻螺纹 [TABLE 23]
Thread and point details for Type A threads [TABLE 23]
英制Y型切削螺纹 [TABLE 6]
Thread and point details for Type Y thread cutting screws [TABLE 6]
钻尾自攻钉的技术要求
Steel Self-Drilling Tapping Screws
螺纹-UNJ型,英制
Screw Threads - UNJ Profile, Inch
米制自攻螺钉用螺纹及末端型式
Metic threads and points for tapping screws
木螺纹
Wood thread
木螺纹
Thread and body dimeters for wood screws
木螺纹
Wood thread
螺纹杆(统一螺纹) (F568M, A193/A193M, F738M, F468M)
Threaded rods(inch series) (F568M, A193/A193M, F738M, F468M)
F型 自攻自切螺钉
米制密封螺纹
Metric threads where pressure-tight joints are made on the threads
普通螺纹 中等精度、优选系列的极限尺寸
General purpose metric screw threads - Limits of sizes for the screw threads of medium quality and preferable plan
普通螺纹 优选系列
General purpose metric screw threads - Preferable plan
普通螺纹量规 技术条件
Specification of gauges for general purpose screw threads
普通螺纹 极限偏差
General purpose metric screw threads - Limit deviations
普通螺纹 基本尺寸
General purpose metric screw threads - Basic dimenslons
普通螺纹(一般用途米制螺纹)- 直径与螺距系列 (ISO 261: 1998, MOD)
General purpose metric screw threads - General plan (ISO 261: 1998, MOD)
普通螺纹 基本牙型 (ISO 68-1:1998, MOD)
General purpose metric screw threads-Basic profile(ISO 68-1:1998, MOD)
普通螺纹 管路系列
General purpose metric screw threads - The plan for pipe systems
梯形螺纹 第1部分:牙型
Trapezoidal screw threads - Part 1: Profiles
统一螺纹 直径与牙数系列
Unified screw threads - General plan
普通螺纹 极限尺寸
General purpose metric screw threads - Limits of sizes
普通螺纹 粗糙精度、优选系列的极限尺寸
General purpose metric screw threads - Limits of sizes for the screw threads of coarse quality and preferable plan
锯齿形(30°, 3°)螺纹 - 第1部分: 牙型
Buttress Thread with the Flank Angles of 3 and 30 Degrees - Part 1: Profiles
钢丝螺套用内螺纹
Internal thread for wire thread inserts
60°干密封管螺纹 (ASME B1.20.3:1976,MOD)
Dryseal pipe threads with the thread angle of 60 degrees
60°密封管螺纹(NPT锥管螺纹)
统一螺纹搓制和滚制前的毛坯直径
The blank diameters for rolling unified screw threads
普通螺纹搓制和滚制前的毛坯直径
The blank diameters for rolling general purpose metric screw threads
普通螺纹 公差
General purpose metric screw threads - Tolerances
小螺纹 :公差和极限尺寸
Miniature screw threads : Tolerances and limits of size
小螺纹 :牙型、系列和基本尺寸
Miniature screw threads : Profiles , general plan and basic dimensions
30°楔形防松螺纹
Locking threads with 30 degree wedge ramp
尼龙锁紧用自攻螺纹
Tapping thread for nylon lock
锥度1:16 管牙R牙
Whitworth pipe threads for pipe unions
ISO一般用途米制螺纹 基本尺寸
ISO general-purpose metric screw threads─Basic dimensions
ISO一般用途米制螺纹 公差Part3:结构螺纹的偏差
Deviations for constructional screw threads
ISO一般用途米制螺纹--公差 part2:内螺纹和外螺纹的极限尺寸
Limits of sizes for general purpose external and internal screw threads
ISO通用公制螺纹 螺钉、螺栓和螺母的选择尺寸
ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
普通螺纹 直径与螺距系列
ISO general purpose metric screw threads - General plan
自攻螺纹
Tapping Screws Thread
非螺纹密封连接的管螺纹 G管螺纹
Pipe threads where pressure-tight joints are not made on the threads