按标准分类
澳标
美标
美标
美标
美标
英标
台湾
德标
欧标
国标
俄标
航空
航天
美标
国际
机械行业
日标
韩标
法国
建筑
汽标代号
意大利
印标
石化
铁道部
化工
电力
压铆件
军标
浙江制造团体标准
深圳紧固件行业协会标准
浙工大
压力容器
船舶
原化工部
原电子工业部
能源行业标准
汽车行业标准
西门子
万禧
按形状特征
[德标]DIN 609 - 1984
六角头铰制孔用长螺纹螺栓
Hexagon fit bolts with long threaded dog point
[德标]DIN 1441 - 1974
螺栓用粗制垫圈
Washers Type Coarse For Bolts
[德标]DIN 1440 - 1974
销轴用平垫圈，中等精度
Washers for clevis pins, finish medium
[德标]DIN 6880 - 1975
矩形键
Rectangular Key
[德标]DIN 6880 - 1975
方形键
Square Key
[德标]DIN 1480 - 1975
花篮螺栓
Turnbuckles
[德标]DIN 1478 - 1975
钢管材或钢棒材制套筒螺母
Turnbuckles made from steel tube or round steel bar
[德标]DIN 5417 (M3200/SP) - 1976
滚动轴承用紧固零件带环槽轴承用挡圈
Securing Parts for Rolling Bearings-Snap Rings for Bearings with Ring Groove
[德标]DIN 986 - 1977
非金属嵌件六角盖形螺母
Self·Locking Domed Cap Nuts
[德标]DIN 7979 - 1977
内螺纹圆柱销
Parallel Pins With Internal Thread
[德标]DIN 7978 - 1977
内螺纹圆锥销
Taper Pins With Internal Thread
[德标]DIN 7977 - 1977
螺尾锥销
Taper Pins With Thread And Constant Thread Part
[德标]DIN 7964 - 1977
六角头不脱出螺钉
Hexagon head screws with waisted shank
[德标]DIN 258 - 1977
螺尾锥销
Taper pins with thread ends and constant taper lengths
[德标]DIN 1445 - 1977
带螺纹T型销轴（T型台阶栓）
Clevis pins with head and stud end
[德标]DIN 7346 - 1978
弹性圆柱销 轻型
Spring-Type Straight Pins (Roll Pins) - Light-weight Type
[德标]DIN 25192 - 1978
铁路车辆用T形头螺栓
T-Head Bolts (Hammer Head Bolts) For Railway Vehicles
[德标]DIN 1481 - 1978
弹性圆柱销，重型
Spring Type Straight Pins, Slotted, Heavy Type
[德标]DIN 1477 - 1978
沉头槽销
Countersunk Head Grooved Pins
[德标]DIN 1476 - 1978
圆头槽销
Round Head Grooved Pins
[德标]DIN 1475 - 1978
槽销，中部槽长为1/3全长
Grooved pins - 1/3 Length Centre Grooved
[德标]DIN 1474 - 1978
槽销,半长倒锥槽
Grooved pins-Half-length reverse-taper grooved
[德标]DIN 1473 - 1978
带倒角及全长平行沟槽的槽销
Grooved Pins, Full Length Parallel Grooved With Chamfer
[德标]DIN 1472 - 1978
槽销 半长锥槽
Grooved Pins, Half Length Taper Grooved
[德标]DIN 1471 - 1978
槽销 全长锥槽
Grooved pins, Full Length Taper Grooved
[德标]DIN 1470 - 1978
带导杆及全长平行沟槽的槽销
Grooved pin, full length parallel grooved with pilot
[德标]DIN 1469 - 1978
带颈配合槽销
Grooved Pins, Half Length Grooved With Gorge
[德标]DIN 916 - 1980
内六角凹端紧定螺钉
Hexagon Socket Set Screws With Cup Point
[德标]DIN 915 - 1980
内六角柱端紧定螺钉
Hexagon Socket Set Screws With Dog Point
[德标]DIN 914 - 1980
内六角锥端紧定螺钉
Hexagon Socket Set Screws With Cone Point
[德标]DIN 913 - 1980
内六角平端紧定螺钉
Hexagon Socket Set Screws With Flat Point
[德标]DIN 5299 (E) - 1980
弹簧钩 E型
Snap Hook Round Wire and Forged - Form E
[德标]DIN 5299 (D) - 1980
弹簧钩 D型
Snap Hook Round Wire and Forged - Form D
[德标]DIN 15237 - 1980
皮带螺钉
Belt screws，Continuous Mechanical Handling Equipment; Seating Screws And Cupped Washers For The Attachment Of Components To Belts
[德标]DIN 984 (D2000/JK/DHT) - 1981
带齿孔用挡圈
Spring Retaining Rings With Lugs For Use In Bores (Internal Circlips)
[德标]DIN 983 (D2100/AK/DST) - 1981
带齿轴用挡圈
Retaining Rings With Lugs For Shafts
[德标]DIN 7 - 1981
圆柱销
Parallel Pins
[德标]DIN 6799 (D1500/RA/DE) - 1981
开口挡圈
Lock washers (retaining washers for shafts)
[德标]DIN 608 - 1981
沉头方颈螺栓
Flat Countersunk Square Neck Bolts With Short Square
[德标]DIN 607 - 1981
圆头带榫螺栓
Round head nib bolts
[德标]DIN 604 - 1981
沉头带榫螺栓
Flat Countersunk Nib Bolts
[德标]DIN 603 - 1981
大半圆头方颈螺栓
Mshroom head square neck bolts
[德标]DIN 472 (D1300/J/DHO) - 1981
孔用卡簧
Jump Ring For Hole
[德标]DIN 471 (D1400/A/DSH) - 1981
轴用挡圈
Retaining Rings For Shafts—normal Type And Heavy Type
[德标]DIN 1 - 1981
球面端圆锥销
Taper Pins With Round End
[德标]DIN 934 - 1982
六角螺母 米制螺纹 A级和B级
Hexagon nuts, Metric threads, Product grades A and B
[德标]DIN 7504 (K) - 1982
六角带介（华司）自攻自钻螺钉
Hexagon head drilling screws with tapping screw thread with collar
[德标]DIN 7504 (L) - 1982
开槽六角带介（华司）钻尾自攻钉
Slotted Hex Head Self-drilling Tapping Screws With Collar
[德标]DIN 7504 (Q) - 1982
十字槽半沉头钻尾自攻钉
Cross recessed raised contersunk self-drilling tapping screws
[德标]DIN 7504 (P) - 1982
十字槽沉头自攻自钻螺钉
Cross Recessed Countersunk Head Drilling Screws With Tapping Screw Thread
[德标]DIN 7504 (N) - 1982
十字槽盘头自攻自钻螺钉
Cross Recessed Pan Head Drilling Screws With Tapping Screw Thread
[德标]DIN 74361-2 (F) - 1982
轮毂螺母 - 六角锁紧螺母 - F型
Fastening Devices For Bolt Centering - Form F - Conical Nut
[德标]DIN 74361-2 (A) - 1982
轮毂螺母 - 六角球面法兰螺母 - A型
Fastening Devices For Bolt Centering - Form A - Hexagon Spherical Nuts With Flange
[德标]DIN 981 (KM) - 1983
滚动轴承锁紧螺母
Rolling bearings - Locknuts
[德标]DIN 940 - 1983
b1=2.5d粗杆双头栓
Studs with a length of engagement equal to about 2.5d
[德标]DIN 94 - 1983
开口销
Split Pins
[德标]DIN 928 - 1983
四方焊接螺母
Square weld nuts
[德标]DIN 912 - 1983
内六角圆柱头螺钉
Hexagon socket head cap screws
[德标]DIN 908 - 1983
内六角圆柱头喉塞
Hexagon Socket Screw Plugs With Parallel Screw Thread
[德标]DIN 906 - 1983
内六角套筒管塞. 锥形螺纹
Hexagon socket pipe plugs
[德标]DIN 6927 - 1983
金属锁紧六角法兰螺母
Prevailing Torque Type All-Metal Hexagon Nuts With Flange
[德标]DIN 6926 - 1983
非金属嵌件锁紧六角法兰螺母
Prevailing Torque Type Hexagon Nuts With Flange And With Non-Metallic Insert
[德标]DIN 6923 - 1983
六角法兰螺母
Hexagon flange nuts
[德标]DIN 6922 - 1983
六角头法兰细杆螺栓
Hexagon flange bolts with reduced shank
[德标]DIN 6921 - 1983
六角头法兰螺栓
Hexagon Flange Bolts
[德标]DIN 444 - 1983
活节螺栓
Eye Bolts
[德标]DIN 432 - 1983
外舌止动垫圈
External tab washers (locking tab washers)
[德标]DIN 316 - 1983
蝶形螺钉
Wing screws
[德标]DIN 315 - 1983
蝶形螺母
Wing nuts
[德标]DIN 7997 - 1984
十字槽沉头木牙螺钉
Cross recessed countersunk head wood screws
[德标]DIN 7995 - 1984
十字槽半沉头木牙螺钉
Cross recessed raised countersunk head wood screws
[德标]DIN 7500 (M) - 1984
十字槽沉头三角锁紧自攻钉
Cross Recessed Countersunk Head Thread Rolling Screws
[德标]DIN 7500 (E) - 1984
内六角圆柱头三角锁紧螺钉
Socket Hexagon Cheese Head Thread Rolling Screws
[德标]DIN 7500 (C) - 1984
十字槽盘头三角锁紧自攻螺钉
Cross recessed pan head thread rolling screws
[德标]DIN 6340 - 1987
夹具用精制平垫圈
Washers for Clamping Devices
[德标]DIN 6925 - 1987
全金属六角锁紧螺母
Prevailing Torque Type All-Metal Hexagon Nuts
[德标]DIN 6924 - 1987
非金属嵌件锁紧厚六角螺母
Prevailing Torque Type Hexagon Nuts With Non-Metallic Insert
[德标]DIN 6913 - 1987
带安全圈的弹簧垫圈 A型 / B型
Spring Lock Washers with Safety Ring
[德标]DIN 6796 - 1987
螺栓连接件用锥形弹簧垫圈
Conincal Spring Washers Bor Bolt/Nut Assemblies
[德标]DIN 439 (-2) - 1987
带倒角的六角薄螺母 产品等级：A级和B级
Chamfered Hexagon Thin Nuts—Product Grades A and B