澳标
美标
美标
美标
美标
英标
台湾
德标
欧标
国标
俄标
航空
航天
美标
国际
机械行业
日标
韩标
法国
建筑
汽标代号
意大利
印标
石化
铁道部
化工
电力
压铆件
军标
浙江制造团体标准
深圳紧固件行业协会标准
浙工大
压力容器
船舶
原化工部
原电子工业部
能源行业标准
汽车行业标准
西门子
万禧
英制淬硬钢垫圈 [圆垫圈、圆形削剪垫圈、特厚垫圈]
Hardened Circular, Clipped Circular, and Extra, Inch Washers
米制淬硬钢垫圈 [圆垫圈、圆形削剪垫圈]
Metric Hardened Steel Washers
英制栓接结构用压紧垫圈型压力指示器 [DTI 垫圈]
Compressible-Washer-Type Diredt Tension Indicators for Use with Structual Fasteners,Inch Series
米制栓接结构用压紧垫圈型压力指示器 [DTI 垫圈]
Compressible-Washer-Type Diredt Tension Indicators for Use with Structual Fasteners,Metric Series
淬硬钢垫圈 [圆垫圈、圆形削剪垫圈、特厚垫圈]
Hardened circular, clipped circular, and extra-thick washers
方斜垫圈和剪切方斜垫圈
Hardened Beveled Washers
圆形和圆形削剪型淬硬钢垫圈 [Table 4] (ASTM F436)
Hardened Steel Circular and Circular Clipped Washers (ASTM F436)
工字钢用方斜垫圈
Square hardened beveled washers
米制淬硬钢垫圈 [圆垫圈、圆形削剪垫圈]
Metric hardened steel washers
栓接结构用压紧垫圈型压力指示器 [DTI 垫圈]
Compressible-Washer-Type Diredt Tension Indicators for Use with Structual Fasteners
淬硬钢垫圈 [圆垫圈、圆形削剪垫圈]
Circular and clipped circular washers—Hardened steel washers
淬硬钢垫圈 [圆垫圈、圆形削剪垫圈]-[公制]
Hardened steel washers
英制方斜垫圈和剪切方斜垫圈
Hardened Beveled Washers, Inch Washers
米制方斜垫圈和剪切方斜垫圈
Metric Hardened Beveled Washers
内六角花形(梅花槽)沉头螺钉
Hexagon Socket Flat Countersunk Head Cap
热交换器用六角螺堵
Hex Head Plug For Heat Exchanger
低温用合金钢螺栓材料标准规范
Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
高温或高压及其他特殊用途用合金钢和不锈钢螺栓
Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
高温设备用合金钢和不锈钢螺栓材料的标准规范
Alloy-steel and stainless steel bolting for high temperature or high pressure service and other special purpose applications
低温用合金钢螺栓材料标准规范
Alloy-steel and stainless steel bolting for low-temperature service
经热处理的钢结构螺栓,最小抗拉强度120/105ksi
Structural bolts, steel, heat treated 120/105 ksi minimum tensile strength
低温条件下使用的合金钢、不锈钢栓接材料
经热处理的最小抗拉强度为830 MPa的钢制结构螺栓规格(米制)
Standard Specification for structural bolts,steel,heat treated 830MPa minmum tensile strength(metric)
高温设备用合金钢和不锈钢螺栓材料的标准规范
Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Servise
镍-铁-铬-钼-铜合金(UNS N08825, UNS N08821, 和UNS N06845)板、薄板和钢带的标准规范
Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08821, and UNS N06845) Plate , Sheet , and Strip
高温用沉淀硬化螺栓标准规范(UNS N 07718)
Precipitation-hardening bolting (UNS N07718) for high temperature service
镍铬铁合金(UNS N06600,N06601,N06603,N06690,N06693,N06025,N06045和N06696),镍铬钴钼合金(UNS N06617),以及镍铁铬钨合金(UNS N06674)条、棒和线材的标准规范
Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* Nickel- Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Rod, Bar, and Wir
不锈钢内凹槽、方头和开槽无头紧定螺钉的标准规范
Stainless steel socket, square head, and slotted headless set screws
合金钢有眼螺栓的标准规范
Alloy steel eyebolts
一般用途有色金属螺栓, 六角头螺钉及凹圆头帽螺钉的标准规格
钽和钽合金棒材和线材
Tantalum and Tantalum Alloy Rod and Wire
铝青铜棒料,盘条和型材的标准规范
Standard Specification for Aluminum Bronze Rod, Bar, and Shapes
高速切削不锈钢棒材
Free-Machining Stainless Steel Bars
铬镍合金铸件
Castings, Chromium-Nickel Alloy
碳素钢吊环标准规范
Carbon steel lifting eyes
热锻碳素钢和合金钢棒材一般要求标准规范
Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought
不锈钢内六角螺钉标准规范
Stainless steel socket head cap screws
外科植入用Ti-6AI-4VELI(超低间隙) 锻造合金标准(UNSR56401)
Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)
钛及钛合金棒料和坯料标准规范
Standard Specification for Titanium and Titanium Alloy Bars and Billets
易切削铜棒、线和型材标准
Free-Cutting Copper Rod, Bar, Wire, and Shapes
铸造和锻造有色金及合金统一牌号编制标准
Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought
铜镍锌合金(镍银)和铜镍杆材和棒材的标准规范
Copper-Nickel-Zinc alloy (Nickel silver) and Copper-Nickel rod and bar
沉淀硬化不锈钢和耐热钢板、薄板和带材
Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
海洋环境用耐大气腐蚀的高强度低合金镍、铜、磷钢H型桩和板桩
High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
韧性良好的结构碳钢板标准规范
Standard Specification for Structural Carbon Steel Plates of Improved Toughness
热处理碳-锰-硅钢压力容器板标准规范
Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese- Silicon Steel
碳钢及合金钢盘条和粗圆钢丝通用要求
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel
标准等级合金钢棒的标准规范
Steel Bars, Alloy, Standard Grades
高强度低合金结构钢
High-Strength Low-Alloy Structural Steel
外科植入物用锻制Co-20Cr-15W-10Ni合金的标准规范(UNS R30605)
Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)
“扭转”型张力控制结构螺栓/螺母/垫圈组件,最小抗拉强度为120/105 ksi的热处理钢制
“Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
铝及铝合金挤制棒材、杆材、线材、型材和管材标准规范
Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
铝和铝合金薄板和板材(米制)标准规范
Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)
铝及铝合金薄板和中厚板
Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
耐大气腐蚀的高强度低合金结构钢板
High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
中碳耐磨轴承钢
Medium Carbon Anti-Friction Bearing Steel
耐磨轴承用渗碳钢
Carburizing Steels for Anti-Friction Bearings
热处理合金钢结构螺栓,最小150ksi 抗拉强度
Structural bolts, alloy steel, heat treated, 150 ksi minimum tensile strength
高淬透性耐磨轴承钢的技术规范
Standard Specification for High Hardenability Antifriction Bearing Steel
通用最低拉伸强度为120/105/90ksi的热处理钢制六角帽螺钉, 螺栓和螺柱的标准规范
Hex cap screws, bolts and studs, steel, heat treated, 120/105/90 ksi minimum tensile strength, general use
经热处理的钢结构螺栓,最小抗拉强度830MPa
Structural bolts, steel, heat treated 830 Mpa minimum tensile strength
奥氏体、奥氏体-铁素体不锈钢无缝与焊接卫生管
Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
六角头螺栓用冷镦优质中高碳钢线材
Medium and high carbon steel wire, cold heading quality, hexagon head bolts
特殊用途的高强度沉淀硬化和双相不锈钢螺栓
High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
高温、高压或高温高压环境用螺栓用碳素钢、合金钢和不锈钢螺母标准规范
Carbon steel, Alloy steel, and Stainless steel nuts for bolts for high pressure or high temperature service, or both
高温熔焊用碳素铸钢件的标准规范
Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
须符合淬火淬透性要求的碳钢与合金钢棒材规范
Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
冷镦和冷锻不锈钢线材及盘条标准规范
Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
焊接不锈钢机械管
Welded Stainless Steel Mechanical Tubing
钢筋混凝土配筋用变形和光面坯钢筋
Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
高压用碳钢和合金钢管法兰、管件及配件锻件标准规范
Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
钢筋混凝土配筋用低合金变形钢筋和光面钢筋
Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement
预应力混凝土用应力消除未涂覆的密实七股钢丝绞绳
Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete
铜镍锡合金、铜镍锌合金(镍银)和铜镍合金板、薄板、带材及轧制棒材
Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy(Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
铝及铝合金无缝管和无缝挤压管标准规范
Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
铜铁合金板、薄板、带材和轧制棒材
Standard Specification for Copper-Iron Alloy Plate , Sheet, Strip, and Rolled Bar
淬火钢垫圈的标准规范
Hardened steel washers inch and metric dimensions
1型不锈钢公制螺母标准规范
Style 1 stainless steel metric nuts
米制不锈钢凹圆头螺钉和平沉头螺钉标准规格
Stainless steel socket button and flat countersunk head cap screws (Metric)
不锈钢凹圆头螺钉和平埋头帽螺钉标准规格
Stainless steel socket button and flat countersunk head cap screws