标准查询 - 易紧通

[美标]ASTM A193/A193M - 2001

高温设备用合金钢和不锈钢螺栓材料的标准规范
Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Servise

[美标]SAE AMS 5758J - 2014

耐蚀合金圆钢棒20Cr-35Ni-35Co-10Mo，真空感应加自耗电极重熔，固溶热处理，用于冷加工强化
Alloy,Corrosion-Resistant，Bars 20Cr-35Ni-35Co-10Mo Vacuum Induction Plus Consumable Electrode Vacuum Remelted Solution Heat Treated for Work Strengthening

[欧标]EN 10283 - 1998

耐腐蚀钢铸件

[美标]SAE AMS 5913B - 2014

耐蚀钢薄板和带材 19Cr-9.2Ni冷轧，硬态，抗拉强度185ksi(1276Mpa)
Steel,Corrosion-Resistant,Sheet and Strip 19Cr-9.2Ni Cold Rolled ,Full Hard, 185ksi(1276Mpa) Tensile Strength

[美标]SAE AMS 5699G - 2013

弹性回火、脱溶淬硬 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe 耐腐蚀和耐热镍合金丝
Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 72Ni - 1 5.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Spring Temper, Precipitation Hardenable

[美标]SAE AMS 5636F - 2012

耐蚀钢棒材和线材 18Cr-9.0Ni(SAE 30302) 固溶处理并冷拉，抗拉强度100ksi(689Mpa)
Steel, Corrosion-Resistant, Bars and Wire 18Cr - 9.0Ni(SAE 30302) Solution Heat Treated and Cold Drawn 100ksi(689Mpa) Tensile Strength

[美标]SAE J 1268 - 2010

碳素和合金工字钢用保证淬透性钢带
Hardenability Bands for Carbon and Alloy H Steels

[美标]SAE J 430 - 2007

非螺纹紧固件碳钢实心铆钉英制系列用机械和化学要求
Mechanical and chemical requirements nonthreaded fasteners, Carbon steel solid rivets - inch series

[美标]SAE AMS 5528H - 2007

17Cr-7.1Ni-1.1Al不锈钢薄板、厚板和带材，固溶处理，可沉淀硬化
Steel, Corrosion-Resistant, Sheet, Strip, and Plate 17Cr - 7.1Ni - 1.1Al Solution Heat Treated, Precipitation Hardenable

[美标]SAE AMS 5599G - 2007

固溶热处理 62Ni - 21.5Cr - 9.0Mo - 3.7 Cb (Nb) 耐腐蚀和耐热铁镍合金薄板、带材和厚板
Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo -3.7Cb(Nb) Solution Heat Treated

[美标]SAE AMS 5513H - 2004

耐蚀钢厚板、薄板和带材19Cr-9.2Ni固溶热处理
Steel, Corrosion-Resistant, Sheet, Strip, and Plate 19Cr - 9.2Ni (SAE 30304) Solution Heat Treated

[美标]SAE AMS 4676E - 2003

热精加工、脱溶硬化 66.5Ni - 3.0Al - 0.62Ti - 28Cu 耐腐蚀镍铜合金棒材和锻件
Nickel-Copper Alloy, Corrosion-Resistant, Bars and Forgings 66.5Ni - 3.0Al - 0.62Ti - 28Cu Hot-Finished, Precipitation Hardenable

[美标]SAE AMS 5643Q - 2003

16Cr-4.0Ni-0.3Cb-4.0Cu耐蚀钢棒料、线材、锻件、管件和环形件
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution Heat Treated, Precipitation Hardenable

[美标]SAE J 403 - 2001

碳素钢化学成分

[美标]SAE J 404 - 2000

SAE 合金钢化学成分
Chemical Compositions of SAE Alloy Steels

[美标]SAE AMS 5747C - 2000

固溶处理，沉淀硬化72Ni - 1 5.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe耐腐蚀和耐热镍基合金棒材、锻件和环件
Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 72Ni - 1 5.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Solution Heat Treated, Precipitation Hardenable

[美标]SAE J1249 - 2000

美国SAE、AISI标准和UNS系统合金结构钢的钢号及化学成分
Former SAE Standard and Former SAE Ex-Steels

[美标]SAE J405 - 1998

(R)SAE锻造不锈钢的化学成分
（R）Chemical Composition of SAE Wrought Stainless Steels

[美标]SAE J 470c - 1976

锻造镍及镍相关合金
WROUGHT NICKEL AND NICKEL-RELATED ALLOYS

[美标]SAE AMS 5678F - 1975 (R2002)

冷拉、脱溶淬硬17Cr - 7.1Ni - 1.1Al 耐腐蚀钢丝
Steel, Corrosion Resistant, Wire 17Cr - 7.1Ni - 1.1Al Cold Drawn, Precipitation-Hardenable

[美标]SAE J467b - 1956 (R1968)

特殊用途合金钢
Special Purpose Alloys (Superalloys)

[欧标]EN 10269 - 2013

规定高温和/或低温性能的紧固件用钢和镍合金
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties

[欧标]EN 10305-1 - 2010

精密钢管交货技术条件第1部分冷拉无缝钢管

[欧标]EN 10028-2 - 2009

压力容器用的钢板制品.规定了高温性能的非合金和合金钢
Flat products made of steels for pressure purposes Part 2 Non-alloy and alloy steels with specified elevated temperature properties

[欧标]EN 10028-3 - 2009

压力容器用的钢板制品.适于焊接的一般退火细颗粒结构钢
Flat products made of steels for pressure purposes Part 3 Weldable fine grain steels, normalized

[欧标]EN 10208-2 - 2009

可燃流体用钢管.技术交付条件.B级管要求
Steel pipes for pipelines for combustible fluids. Technical delivery conditions

[欧标]EN 10349 - 2009

钢铸件.奥氏体锰钢铸件

[欧标]EN 10120 - 2008

焊接气瓶用钢板和钢带

[欧标]EN 10277-2 - 2008

光亮钢制品.交货技术条件.第2部分:一般工程用钢
Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes

[欧标]EN 10302 - 2008

镍和镍钴合金的耐蠕变钢

[欧标]EN 10216-2 - 2007

压力无缝钢管.交货技术条件.规定高温特性的非合金和合金钢管

[欧标]EN 10255 - 2007

非合金钢管，适用于焊接和螺纹 - 交货技术条件
Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions

[欧标]EN 10083-2 - 2006

淬火和回火钢.第2部分:非合金钢交货技术条件
Steels for quenching and tempering. Part 2:Technical delivery conditions for non alloy steels

[欧标]EN 10083-3 - 2006

淬火钢和回火钢第3部分合金钢的交货技术条件

[欧标]EN 10210-1 - 2006

非合金和细晶结构钢的热精加工空心型材.交货技术要求
Hot finished structural hollow sections of non-alloy and fine grain steels - Technical delivery requirements

[欧标]EN 10268 - 2006 (+A1-2013)

由冷成形高弯曲强度冷轧钢薄平板制品.交付技术条件
cold rolled steel flat products with high yield strength for cold forming - technical delivery conditions

[欧标]EN 10269 - 2006

规定高温和/或低温性能的紧固件用钢和镍合金
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties

[欧标]EN 10088-1 - 2005

不锈钢第1部分:不锈钢的清单
Staehle Stainless steels. Part 1:List of stainless steels

[欧标]EN 10088-2 - 2005

不锈钢-第 2 部分：通用耐腐蚀钢的薄钢板/钢板和带钢的技术交货条件

[欧标]EN 10088-3 - 2005

不锈钢第3部分：一般用途的半成品，钢棒，轧制线材和型钢的交货条件
Stainless steels--Part 3:Techincal delivery conditions for semi-finished products,bar,rods and sections for general purposes

[欧标]EN 10207 - 2005

简单压力容器用钢材.板材、带材和棒材交货技术要求

[欧标]EN 10293 - 2005

铸钢件

[欧标]EN 10296-2 - 2005

机械工程和一般工程用焊接圆钢管.交货技术条件.第2部分:不锈钢
Welded circular steel tubes for mechanical and general engineering purposes — Technical delivery conditions — Part 2 Stainless steel

[欧标]EN 10297 (2) - 2005

机械和一般工程用途-交货技术条件-第2部分：不锈钢无缝钢管
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel

[欧标]EN 10025-2 - 2004

结构钢的热轧产品 — 第二部分：非合金结构钢的技术供货条件
Hot rolled products of structural steels - Part 2:Technical delivery conditions for non-alloy structural steels

[欧标]EN 10025-3 - 2004

热轧结构钢钢材第3部分：正火/正火轧制可焊接的细晶结构钢
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels

[欧标]EN 10025-4 - 2004

结构钢热轧产品第4部分热机械轧制可焊接细晶粒结构钢

[欧标]EN 10216-1 - 2004

承压用无缝钢管-交货技术条件第1部分：规定室温特性的非合金钢管

[欧标]EN 10253-4 - 2003

对接焊管道接头.具有特殊检验要求的锻制奥氏体和铁素体－奥氏体(二相)不锈钢
Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements

[欧标]EN 10296-1 - 2003

机械和一般工程用焊接圆钢管.技术交货条件.非合金和合金钢管

[欧标]EN 10297-1 - 2003

机械和通用无缝钢管交货技术条件第1部分:非合金和合金钢管
Seamless steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes

[欧标]EN 10305-5 - 2003

精密仪器用钢管.交货技术条件.第5部分:焊接冷精加工方形和矩形管材
Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes

[欧标]EN 10089 - 2002

调质弹簧用热轧钢交货技术条件
Hot rolled steels for quenched and tempered springs; technical delivery conditions

[欧标]EN 10132-4 - 2002

热处理用冷轧窄钢条.技术交付条件.弹簧钢和其它应用钢

[欧标]EN 10224 - 2002

输送液体（包括人类生活用水）用的非合金钢管和管件
Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption

[欧标]EN 10295 - 2002

耐热钢铸件
Heat resistant steel castings

[欧标]EN 10305-2 - 2002

精密仪器用钢管.交货技术条件.焊接冷拔钢管
Steel tubes for precision applications - Technical delivery conditions - Welded cold drawn tubes

[欧标]EN 13835 - 2002

铸造.奥氏体铸铁

[欧标]EN 10085 - 2001

氮化钢交付技术条件
Nitriding Steels. Technical Delivery Conditions

[欧标]EN 10263-2 - 2001

冷镦和冷挤压用钢棒、杆和丝.第2部分:冷加工后不热处的钢的交货技术条件
Steel rod,bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working

[欧标]EN 10263-3 - 2001

冷拉钢杆、棒和丝.第3部分:交货技术条件
Steel rod,bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels

[欧标]EN 10263-4 - 2001

冷加工和冷挤压的钢棒、棒材和线材第4部分淬火和回火钢交货的一般技术条件

[欧标]EN 10263-5 - 2001

冷镦和冷挤压钢杆材、棒材和线材.第5部分:不锈钢交货技术条件
teel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels

[欧标]EN 10222-2 - 2000

压力用途用钢制锻件第2部分具有高温特性的铁素体和马氏体钢
Steel Forgings for Pressure Purposes. Part 2:Ferritic and Martensitic Steels with Specified Elevated Temperature Properties

[欧标]EN 10250-2 - 2000

一般工程用自由锻钢锻件.第2部分:非合金钢和特种钢
pen die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels

[欧标]EN 10273 - 2000

有特定高温性能的压力装置用热轧可焊接钢棒
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties

[欧标]EN 10087 - 1999

自由切削钢.半成品和热轧杆棒的交货技术条件
Free-cutting steels Technical delivery conditions for semi-finished products,hot-rolled bars and rods

[欧标]EN 10095 - 1999

耐热钢和镍基合金
Heat resisting steels and nickel alloys

[欧标]EN 10250-3 - 1999

一般工程用途的敞口钢模锻件.合金特殊钢

[欧标]EN 10250-4 - 1999

一般工程用途的自由锻钢锻件:不锈钢

[欧标]EN 10277-3 - 1999

光亮钢产品技术交货条件第3部分高速切削钢

[欧标]EN 12451 - 1999

铜和铜合金.热交换器用无缝圆管

[欧标]EN 12452 - 1999

铜和铜合金.热交换器用轧制翅片无缝管

[欧标]EN 10084 - 1998

渗碳钢－交货技术条件
Case hardening steels. Technical delivery conditions

[日标]JIS G 4053 - 2003

机械构造用低合金钢
Alloy steel plate for machinery

[日标]JIS G 3124 - 2004

中、常温压力容器用高强度钢板
Cold finished carbon and alloy steel bars

[日标]JIS G 3459 - 2004

管道用不锈钢管
Stainless steel pipes

[日标]JIS G 3509-1 - 2003

低合金冷镦钢第1部分:线材
Low-alloyed steels for cold heading. Part 1:Wire rods

[日标]JIS G 4052 - 2003

保证淬透性结构钢
Structural steels with specified hardenability bands

[日标]JIS G 7401 - 2000

冷锻及冷轧挤压用钢
Steels for cold heading and cold extruding

按标准分类

按产品分类

按形状特征