槽销
推荐供应商
 |
苏州质品紧固件有限公司
苏州质品紧固件是专业的紧固件制造厂家之一，主营：垫圈、销、平键、螺栓、螺钉等。 联系我们：沐自成 ，13524395719 主营: 圆柱销 槽销 内梅花防松螺钉 内六角法兰面防松螺钉 紧固件一站式配套供货 |
相关产品与标准及供货信息
 |
DIN 1472 - 1978 槽销 半长锥槽 Grooved Pins, Half Length Taper Grooved |
|
|
DIN EN ISO 8745 - 1998 槽销 半长锥槽 Grooved Pins, Half-Length Taper Grooved |
 |
GB /T 13829.2 - 2004 槽销 带倒角及全长平行沟槽 Grooved Pin, Full Length Parallel Grooved with Chamfer |
 |
GB /T 13829.3 - 2004 槽销 中部槽长为1/3全长 Grooved Pins-One-Third-Length Centre Grooved |
|
|
GB /T 13829.1 (B) - 1992 B型-带倒角及全长平行沟槽槽销. Grooved Pins-full-length Parallel Grooved, with Chamferw |
|
|
GB /T 13829.1 (C) - 1992 C型-中部带1/3全长平行沟槽的槽销 Grooved Pins-one-third-length Centre Grooved |
 |
DIN 1471 - 1978 槽销 全长锥槽 Grooved Pins, Full Length Taper Grooved |
|
|
DIN EN ISO 8744 - 1998 槽销—全长锥槽 Groovd Pins - Full-Length Taper Grooved |
 |
GB /T 13829.1 - 2004 槽销 带导杆及全长平行沟槽 Grooved Pin, Full Length Parallel Grooved with Pilot |
|
|
GB /T 13829.5 - 2004 槽销 全长锥槽 Groovd Pins-Full-Length Taper Grooved |
|
|
GB /T 13829.6 - 2004 槽销 半长锥槽 Grooved Pins - Half-Length Taper Grooved |
 |
GB /T 13829.8 - 2004 圆头槽销 Grooved Pins with Round Head |
|
|
GB /T 13829.1 (A) - 1992 A型-带导杆及全长平行沟槽的槽销. Grooved Pin, Full Length Parallel Grooved with Pilot |
|
|
GB /T 13829.2 (A) - 1992 A型-锥槽的槽销 Grooved Pins-taper Grooved, A-style |
|
|
GB /T 13829.2 (B) - 1992 B型-半长锥槽的槽销 Grooved Pins-half-length Taper Grooved |
|
|
GB /T 13829.3 (A) - 1992 圆头槽销 Grooved Pins - with Round Head |
|
|
DIN 1473 - 1978 带倒角及全长平行沟槽的槽销 Grooved Pins, Full Length Parallel Grooved with Chamfer |
|
|
DIN 1475 - 1978 槽销，中部槽长为1/3全长 Grooved Pins - 1/3 Length Centre Grooved |
 |
DIN 1476 - 1978 圆头槽销 Round Head Grooved Pins |
|
|
ISO 8740 (RN) - 2025 带倒角及全长平行沟槽槽销-倒圆端 Pin with chamfered point and rounded ends (RN) |
|
|
ISO 8744 (RN) - 2025 槽销—全长锥槽 倒圆端 Taper Grooved Pins - Full-length Progressive Grooves - Pin with Rounded Ends (RN) |
|
|
ISO 8745 (RN) - 2025 半长锥槽的槽销 倒圆端 Taper Grooved Pins - Half-length Progressive Grooves - Pin with Rounded Ends (RN) |
|
|
ISO 8746 - 2025 圆头槽销 Grooved Pins with Round Head - Full-length Diamond Grooves |
|
|
ISO 8740 - 1997 带倒角及全长平行沟槽槽销 Grooved Pins-Full-Length Parallel Grooved, with Chamfer |
|
|
ISO 8744 - 1997 槽销—全长锥槽 Groovd Pins-Full-Length Taper Grooved |
|
|
ISO 8745 - 1997 B型-半长锥槽的槽销 Grooved Pins-Half-Length Taper Grooved |
|
|
ISO 8746 - 1997 圆头槽销 Grooved Pins with Round Head |
|
|
ISO 8746 - 1986 圆头槽销 Grooved Pins with Round Head |
|
|
DIN EN ISO 8740 - 1998 带倒角及全长平行沟槽的槽销 Grooved Pins. Full-Length Parallel Grooved, with Chamfer |
|
|
DIN EN ISO 8742 - 1998 槽销，中部带1/3全长平行沟槽 Grooved Pins - 1/3 Length Centre Grooved |
|
|
DIN EN ISO 8746 - 1998 圆头槽销 Grooved Pins with Round Head |
 |
GB /T 13829.4 - 2004 槽销 中部槽长为1/2全长 Grooved Pins - Half-Length Centre Grooved |
 |
GB /T 13829.7 - 2004 槽销 半长倒锥槽 Grooved Pins-Half-Length Reverse-Taper Grooved |
|
|
GB /T 13829.1 (D) - 1992 D型中部带1/2全长平行沟槽的槽销 Grooved Pins - Half-length Centre Grooved |
|
|
GB /T 13829.2 (C) - 1992 C型-半长倒锥槽的槽销 Grooved Pins-half-length Reverse-taper Grooved |
 |
DIN 1469 - 2012 带颈配合槽销，沟槽长为全长1/2 Grooved Pins, Half Length Grooved with Gorge |
|
|
DIN 1469 - 2011 带颈配合槽销 Grooved Pins, Half Length Grooved with Gorge |
|
|
DIN 1469 - 1978 带颈配合槽销 Grooved Pins, Half Length Grooved with Gorge |
|
|
DIN 1470 - 1978 带导杆及全长平行沟槽的槽销 Grooved pin, full length parallel grooved with pilot |
|
|
ISO 8742 (RN) - 2026 中部带1/3全长平行沟槽的槽销，圆头端 Grooved Pins-One-Third-Length Centre Grooved - Pin with Rounded Ends (RN) |
|
|
ISO 8739 (RN) - 2025 带导杆及全长平行沟槽, 倒圆端 Pin with Pilotpoint and Rounded Ends |
|
|
ISO 8741 (RN) - 2025 半长倒锥槽的槽销-倒圆端 Reverse-taper Grooved Pins - Half-length Progressive Grooves - Rounded Ends |
|
|
ISO 8739 - 1997 槽销—带导杆及全长平行沟槽 Grooved Pins-Full-Length Parallel Grooved, with Pilot |
|
|
ISO 8741 - 1997 半长倒锥槽的槽销 Grooved Pins - Half-length Reverse Taper Grooved |
|
|
ISO 8742 - 1997 中部带1/3全长平行沟槽的槽销 Grooved Pins-One-Third-Length Centre Grooved |
|
|
DIN EN ISO 8739 - 1998 带导杆及全长平行沟槽的槽销 Grooved Pin, Full Length Parallel Grooved with Pilot |
|
|
DIN 1474 - 1978 槽销,半长倒锥槽 Grooved Pins-Half-Length Reverse-Taper Grooved |
|
|
ISO 8742 (CH) - 2026 槽销，中部带1/3全长平行沟槽，倒角端 Grooved Pins-One-Third-Length Centre Grooved - Pin with Chamfered Ends (CH) |
 |
ISO 13670 (RN) - 2025 倒锥形槽销 - 两侧1/4长度渐变槽 - 圆端 Reverse-taper Grooved Pins - One Quarter-length Progressive Grooves on Both Sides, Pin with Rounded Ends |
 |
ISO 13670 (CH) - 2025 倒锥形槽销 - 两侧1/4长度渐变槽 - 带倒角端 Reverse-taper Grooved Pins - One Quarter-length Progressive Grooves on Both Sides, Pin with Chamfered Ends |
 |
ISO 13672 (RN) - 2025 槽销 半长平行沟槽 末端倒圆 Parallel Grooved Pins - Half-length Diamond Grooves - Rounded Ends |
 |
ISO 13672 (CH) - 2025 槽销 半长平行沟槽 末端倒角 Parallel Grooved Pins - Half-length Diamond Grooves - Chamfered Ends |
 |
ISO 8739 (CH) - 2025 带导杆及全长平行沟槽, 倒角端 Pin Pilot Point and with Chamfered Ends |
 |
ISO 8740 (CH) - 2025 带倒角及全长平行沟槽槽销-倒角端 Pin with Both Chamfered Points (CH) |
 |
ISO 8741 (CH) - 2025 半长倒锥槽的槽销-倒角端 Reverse-taper Grooved Pins - Half-length Progressive Grooves - Chamfered Ends |
 |
ISO 8744 (CH) - 2025 槽销—全长锥槽 倒角端 Taper Grooved Pins - Full-length Progressive Grooves - Pin with Chamfered Ends (CH) |
 |
ISO 8745 (CH) - 2025 半长锥槽的槽销-倒角端 Taper Grooved Pins - Half-length Progressive Grooves - Pin with Chamfered Ends (CH) |
|
|
ISO 8743 - 1997 中部带1/2全长平行沟槽的槽销 Grooved Pins-Half-Length Centre Grooved |
![米制 半长沟槽 槽销 TYPE 43-1 / TYPE 43-2 [TABLE 5]](https://imgcc.164580.com/upload/48/pic/2019/02/27/1551237176514667107.jpg) |
ASME/ANSI B 18.8.100M (B18.8.9M T5) - 2000 (R2005) 米制 半长沟槽 槽销 TYPE 43-1 / TYPE 43-2 [TABLE 5] Metric, Grooved Pins with Half-length Groove, TYPE 43-1 / TYPE 43-2 [TABLE 5] |
|
|
ASME/ANSI B 18.8.100M (B18.8.9M T7) - 2000 (R2005) 米制 半长锥槽 槽销 TYPE 45 [Table 7] Grooved Pins with Half-length Taper Grooved, Metric Series, TYPE 45 [Table 7] |
|
|
ASME/ANSI B 18.8.100M (B18.8.9M T6) - 2000 (R2005) 米制 全长锥槽 槽销 Type 44 [Table 6] Metric Series, Grooved Pins with Full-length Taper Grooved, Type 44 [Table 6] |
|
|
ASME/ANSI B 18.8.100M (B18.8.9M T3) - 2000 (R2005) 米制 全长平行沟槽 槽销 TYPE 39 / TYPE 40 [Table 3] Grooved Pins, Full-length Parallel Grooved - Metric Series, TYPE 39 / TYPE 40 [Table 3] |
|
|
ASME/ANSI B 18.8.100M (B18.8.9M T8) - 2000 (R2005) 米制 圆头槽销 TYPE 46-1 TYPE 46-2 [Table 8] Metric Series, Grooved Pins with Round Head, TYPE 46-1 TYPE 46-2 [Table 8] |
|
|
ASME/ANSI B 18.8.100M (B18.8.9M A) - 2000 (R2005) 米制 半长倒锥沟槽 槽销 TYPE 41 Metric Grooved Pins - Half-length Reverse-taper Grooved, TYPE 41 |
|
|
ASME/ANSI B 18.8.100M (B18.8.9M T4) - 2000 (R2005) 米制 中部槽长1/3全长 平行沟槽 槽销 TYPE 42 [TABLE 4] Metric, Grooved Pins with One Third Length Groove in the Middle, TYPE 42 [TABLE 4] |
|
|
ASME/ANSI B 18.8.100M (B18.8.9M T4) - 2000 (R2005) 米制 中部带1/2全长 平行沟槽 槽销 TYPE 43 [TABLE 4] Metric Grooved Pins, Half-length Centre Grooved, TYPE 43 [TABLE 4] |
|
|
EN 28740 - 1992 槽销 全长平行沟槽 带倒角 Full-Length Parallel Grooved, with Chamfer |
|
|
EN 28741 - 1992 槽销，半长倒锥槽 Grooved Pins - Half-length Reverse-taper Grooved |
|
|
EN 28743 - 1992 中部带1/2全长平行沟槽的槽销 Grooved Pins - Half-Length Centre Grooved |
|
|
EN 28746 - 1992 圆头槽销 Grooved Pins with Round Head |
|
|
NF E 25-750 - 1997 中部带1/2全长平行沟槽的槽销 Grooved Pins. Half Length Centre Grooved |
|
|
NF E 25-761 - 1997 槽销 带导向的全长平行槽 Grooved Pins - Full-length Parallel Grooved, With Pilot |
|
|
NF E 25-762 - 1997 圆锥销 半长沟槽 Grooved Pins. Half-Length Reverse-Taper Grooved |
|
|
NF E 25-763 - 1997 (R2002) 中部带1/3全长平行沟槽的槽销 Grooved Pins. One-Third-Length Centre Grooved |
|
|
NF E 25-764 - 1997 (R2002) 槽销 全长锥槽 Grooved Pins-Full-Length Taper Grooved |
|
|
NF E 25-765 - 1997 槽销 半长锥槽 Grooved Pins - Half-Length Taper Grooved |
|
|
NF E 25-766 - 1997 圆头槽销 Grooved Pins with Round Head |
|
|
NF E 25-772 - 1997 (R2002) 带倒角及全长平行沟槽的槽销 Grooved Pins. Full Length Paralled Grooved, with Chamfer |
 |
SAE J 494 (A) - 2004 A型 槽销 Grooved Straight Pins - Type A |
 |
SAE J 494 (B) - 2004 B型 槽销 Grooved Straight Pins - Type B |
 |
SAE J 494 (C) - 2004 C型 槽销 Grooved Straight Pins - Type C |
 |
SAE J 494 (D) - 2004 D型 槽销 Grooved Straight Pins - Type D |
 |
SAE J 494 (E) - 2004 E型 槽销 Grooved Straight Pins - Type E |
 |
SAE J 494 (F) - 2004 F型 槽销 Grooved Straight Pins - Type F |
|
|
DIN EN ISO 8741 - 1998 槽销，半长倒锥槽 Grooved Pins - Half-length Reverse-Taper Grooved |
|
|
DIN EN ISO 8743 - 1998 槽销 中部槽长为1/2全长 Grooved Pins - Half-Length Centre Grooved |
|
|
EN ISO 8741 - 1997 半长倒锥槽的槽销 Grooved Pins - Half-length Reverse-taper Grooved |
|
|
EN ISO 8743 - 1997 中部带1/2全长平行沟槽的槽销 Grooved Pins - Half-Length Centre Grooved |
|
|
IS 7386 - 2005 半长倒锥槽的槽销 Grooved Pins - Half-length Reverse Taper Grooved |
![F型全长槽销 [Table 8-1]](https://imgcc.164580.com/upload/48/pic/2021/04/30/1619770101164760012.jpg) |
ASME B 18.8.2 - 2020 F型全长槽销 [Table 8-1] Grooved Pins - Type F |
![H型半长槽销 [Table 8 -1]](https://imgcc.164580.com/upload/48/standard/2021/06/16/f2_1623811237.jpg) |
ASME B 18.8.2 - 2020 H型半长槽销 [Table 8 -1] Grooved Pins - Type H |
|
|
ASME B 18.8.2 - 2020 G型槽销 [Table 8 -1] Grooved Pins - Type G |
|
|
ASME B 18.8.2 - 2020 E型槽销 半长锥槽 [Table 8 -1] Grooved Pins - Type E |
|
|
ASME B 18.8.2 - 2020 A型槽销 全长锥槽 [Table 8 -2] Grooved Pins - Type A |
|
|
ASME B 18.8.2 - 2020 圆头槽销 [Table 8-2] Round Head Grooved Drive Studs |
![H型半长槽销 [Table 6]](https://imgcc.164580.com/upload/48/standard/2015/04/22/1429664377056588272.jpg) |
ASME B 18.8.2 - 2000 (R2010) H型半长槽销 [Table 6] Grooved Pins - Type H |
|
|
ASME B 18.8.2 - 2000 (R2010) E型槽销 半长锥槽 [Table 6] Grooved Pins - Type E |
|
|
ASME B 18.8.2 - 2000 (R2010) A型槽销 全长锥槽 [Table 6] Grooved Pins - Type A |
|
|
ASME B 18.8.2 - 2000 (R2010) F型全长槽销 [Table6] Grooved Pins - Type F |
|
|
ASME B 18.8.2 - 2000 (R2010) 圆头槽销 [Table 7] Round Head Grooved Drive Studs |
© 易紧通 服务热线：4006-164580（免长途费）