会员中心 | English | 繁體中文

开槽小圆柱头全柱端螺钉 CNS 4359 - 1980

选择规格尺寸点击↓

M1.4

M1.6

(M1.8)

M2.5

(M3.5)

M10

括号内尺寸为非优选

尺寸单位: mm

台湾CNS 4359 - 1980 CNS4359 4359CNS 开槽小圆柱头全柱端螺钉

扫一扫分享

单重计算公差公制螺纹极限尺寸米/英制螺纹对照螺纹直径与受力截面积最小破坏扭矩牌号等级毛坯直径

螺纹规格
d

M1.4

M1.6

(M1.8)

M2.5

(M3.5)

M10

d_k
d_p	最大值
	最小值
c
k
n
r
t	最大值
	最小值
z

2	2.3	2.5	2.8	3.5	4	4.5	5.5	6.5	8	10	13
0.8	0.8	1	1.2	1.5	2	2.5	2.8	3.5	4.5	6	7.5
0.775	0.775	0.975	1.175	1.475	1.975	2.475	2.775	3.47	4.47	5.97	7.464
0.25	0.25	0.25	0.3	0.4	0.45	0.5	0.6	0.7	0.8	0.9	1.1
0.9	1	1.1	1.2	1.5	1.8	2	2.4	2.7	3.1	3.8	4.6
0.25	0.3	0.3	0.3	0.4	0.5	0.5	0.6	0.8	1	1.2	1.6
0.1	0.1	0.1	0.1	0.1	0.1	0.1	0.2	0.2	0.25	0.4	0.4
0.6	0.7	0.75	0.8	0.95	1.15	1.3	1.5	1.6	1.9	2.4	2.8
0.45	0.5	0.55	0.6	0.75	0.9	1	1.2	1.3	1.5	1.9	2.3
0.6, 0.8, 1, 1.2	0.8, 1, 1.2, 1.6	0.8, 1, 1.2, 1.6	1, 1.2, 1.6, 2	1.2, 1.6, 2, 2.5	1.6, 2, 2.5, 3	1.6, 2, 2.5, 3	2, 2.5, 3, 4	2.5, 3, 4, 5	3, 4, 5, 6	4, 5, 6, 8	5, 6, 8, 10

①,a 按 CNS 4324。

引用参考

GB /T 1172 - 1999

黑色金属硬度及强度换算值

GB /T 5267.1 - 2002

镀锌、镀镍、镀镉、复合镀等层镀层盐雾腐蚀的防护性能

GB /T 193 - 2003

普通螺纹（一般用途米制螺纹）- 直径与螺距系列 (ISO 261: 1998, MOD)

GB /T 3106 - 2016

紧固件 - 螺栓、螺钉和螺柱 - 公称长度和螺纹长度 (ISO 888:2012, MOD)

GB /T 3 - 1997

普通螺纹收尾、肩距、退刀槽和倒角 (ISO 3508:1976 / ISO 4755:1983)

GB /T 5779.1 - 2000

紧固件表面缺陷 - 螺栓、螺钉和螺柱 - 一般要求

GB /T 5779.3 - 2000

紧固件表面缺陷 - 螺栓、螺钉和螺柱 - 特殊要求

注：技术数据仅供参考，请以官方原件为准！

类似标准及供货信息

1	[国标] GB /T 2161 - 1991	机床夹具零件及部件六角头压紧螺钉 The Parts and Units of Jigs and Fixtures-hexagon Head Holddown Screw
2	[国标] GB /T 828 - 1988	开槽盘头定位螺钉 Slotted Pan Head Set Screws with Dog Point
3	[德标] DIN 564 - 1995	小六角头短圆柱截锥端紧定螺钉 Hexagon Set Screws with Small Hexagon，Half Dog Point and Flat Cone Point 供应商(1)
4	[德标] DIN 922 - 2024	开槽小盘头圆柱端螺钉 Slotted Pan Head Screws with Small Head and Full Dog Point
5	[德标] DIN 922 - 2012	开槽小盘头圆柱端螺钉 Slotted Pan Head Screws with Small Head and Full Dog Point
6	[德标] DIN 925 - 2012	开槽沉头长圆柱端螺钉 Slotted Countersunk Head Screws With Dog Point (Flat Head)
7	[德标] DIN 922 - 2006	开槽小盘头圆柱端螺钉 Slotted Pan Head Screws with Small Head and Full Dog Point
8	[德标] DIN 925 - 2006	开槽沉头长圆柱端螺钉 Slotted Countersunk Head Screws with Full Dog Point
9	[德标] DIN 561 - 1995	六角头圆柱端紧定螺钉 Hexagon Head Set Screws with Small Hexagon and Full Dog Point
10	[德标] DIN 922 - 1986	开槽圆头球面圆柱端螺钉 Slotted Pan Head Screws with Ball Face and Full Dog Point
11	[德标] DIN 924 - 1986	开槽半沉头柱端螺钉 Slotted Raised Countersunk Head Screws with Full Dog Point
12	[德标] DIN 925 - 1986	开槽沉头长圆柱端螺钉 Slotted Countersunk Head Screws with Full Dog Point
13	[机械行业] JB /T 8006.2 - 1999	六角头压紧螺钉 Hexagon-headed Holddown Screw
14	[台湾] CNS 4655 - 1984	六角头圆柱锥端紧定螺钉 Hexagon Head Set Screws with Half Dog Point and Cone End
15	[台湾] CNS 4654 - 1983	六角头圆柱端紧定螺钉 CNS 4654-1983 Hexagon Head Set Screws with Dog Piont
16	[台湾] CNS 4412 - 1981	开槽沉头圆柱端螺钉 Slotted Countersunk Head Screws with Dog Point
17	[台湾] CNS 4415 - 1981	开槽半沉头圆柱端螺钉 Slotted Countersunk （Oval） Head Screws with Full Dog Point