① For long products the P and S content can be 0.005% higher.
② For railway applications a maximum S content of 0.010% may be agreed at the time of enquiry and order.
③ If sufficient other N-binding elements are present the minimum total Al content does not apply.
④ Cu content above 0.40% may cause hot shortness during hot forming.

替代列表

EN 10025-3 - 2004 EN 10025-3 - 2019

注：技术数据仅供参考，请以官方原件为准！

标准编号： EN 10025-3 - 2004
中文名称： 热轧结构钢钢材第3部分：正火/正火轧制可焊接的细晶结构钢
英文名称： Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
数据来源： 易紧通（164580.com）

Standard Code: EN 10025-3 - 2004Chinese Name: 热轧结构钢钢材第3部分：正火/正火轧制可焊接的细晶结构钢English Name: Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steelsSource: https://www.164580.com/info_74885.html

Data Source: YJT Fastener Database (164580.com)
Standard: EN 10025-3 - 2004
URL: https://www.164580.com/info_74885.html
License: Commercial use requires authorization

热轧结构钢钢材 第3部分：正火/正火轧制可焊接的细晶结构钢 EN 10025-3 - 2004

热轧结构钢钢材第3部分：正火/正火轧制可焊接的细晶结构钢 EN 10025-3 - 2004