index
logo

平头滚花螺钉, 薄型 DIN 653 - 1986

选择规格尺寸 点击↓

M1

M1.2

M1.4

M1.6

M2

M2.5

M3

(M3.5)

M4

M5

M6

M8

M10

括号内尺寸为非优选
DIN  653 - 1986 平头滚花螺钉, 薄型

尺寸单位: mm
德标DIN 653 - 1986 DIN653 653DIN 平头滚花螺钉, 薄型
DIN  653 - 1986 平头滚花螺钉, 薄型
扫一扫分享
千件重及价格计算 千件重 : kg x 元/kg = 元/千件
默认密度 g/cm3
公称长度L 注:选择后获得 相应重量
螺纹规格
d
M1 M1.2 M1.4 M1.6 M2 M2.5 M3 (M3.5) M4 M5 M6 M8 M10
P 螺距
dk 公称
最大值
最小值
ds 最大值=公称
最小值
e
k 最大值=公称
最小值
0.25 0.25 0.3 0.35 0.4 0.45 0.5 0.6 0.7 0.8 1 1.25 1.5
5.5 6 7 7.5 9 11 12 14 16 20 24 30 36
5.74 6.24 7.29 7.79 9.29 11.35 12.35 14.35 16.35 20.42 24.42 30.42 36.5
5.26 5.76 6.71 7.21 8.71 10.65 11.65 13.65 15.65 19.58 23.58 29.58 35.5
- - - - 2 2.5 3 3.5 4 5 6 8 10
- - - - 1.86 2.36 2.86 3.32 3.82 4.82 5.82 7.78 9.78
- - - - 1.5 2 2 2.5 3 3 4 5 6
1.5 1.5 2 2 2 2.5 2.5 3 3.5 4 5 6 8
1.25 1.25 1.75 1.75 1.75 2.25 2.25 2.75 3.2 3.7 4.7 5.7 7.64
千件钢制重≈kg
- - - - - - - - - - - - -
替代列表

技术条件和引用标准

材料
不锈钢 有色金属
通用要求
螺纹 公差
标准
机械性能 等级(材料)
标准
公差 产品等级
标准
表面处理 -
-
表面缺陷
验收及包装
备注
DIN 267 part 1
≤ M1.4:6h, >M1.6:6g
DIN 13 part 15
St A2-50
C4-50
CuZn = 铜锌合金
DIN 1651 DIN 267 part 11 DIN 267 part 18
≤ M1.4:F
≥ M1.6:A
DIN 267 part 6,DIN ISO 4759 part 1
不经处理 blank blank
电镀 DIN 267 part 9
磷酸盐涂层 DIN 50942
DIN 267 part 19
DIN 267 part 5
① 其他强度等级或材料经协议。
② Only applies to screws without surface protection. 6g allows the application of the usual layer thicknesses according to DIN 267 part 9, whereby the zero line (h-position) must not be exceeded. Depending on the required layer thickness, a larger dimension than that of the g-position must be selected. A larger basic dimension can impair the stripping resistance of the screw connection.
③ St = 9 SMnPb 28 K according to DIN 1651 or an equivalent steel in terms of strength. This material also applies if strength class 5.8 is specified in existing documents due to previous editions of this standard.
④ Rz25 and Rz16 apply to the roughness depths of the surfaces
for thread flanks ≤ M5:Rz16
for thread flanks with cut threads > M5:Rz40
for thread tips:Rz100
⑤ For main and secondary features:
Main feature : thread d, knurl
Secondary feature : length L, head height k, head diameter dk
For the acceptable quality limit, : AQL1 applies to main features, AQL1.5 to secondary features
告诉我在“易紧通”看到,将给您优惠
联系人:吕先生   移动电话: 15057716316/13251043916     电话:0577-86521977 Email: 登陆后可见
材质:碳钢、不锈钢;规格范围:规格齐全。
联系人:庄宏伟   移动电话: 13008864675     电话:0755-89505088 Email: 登陆后可见
材质:碳钢、合金钢、不锈钢、铜、铝、钛;规格范围:M0.6~M6;公称长度:1~60mm;表面处理:镀锌、镍、锌镍合金、电泳、达克罗、CD纹、PVD等。
类似标准及供货信息
1 滚花高头螺钉 [国标]
GB 834 - 1988
滚花高头螺钉
Knurled Thumb Screws
供应商(3)
2 滚花平头螺钉 [国标]
GB 835 - 1988
滚花平头螺钉
Knurled Screws
供应商(4)
3 滚花小头螺钉 [国标]
GB /T 836 - 1988
滚花小头螺钉
Knurled Screws With Small Head
供应商(1)
4 滚花头不脱出螺钉 [国标]
GB 839 - 1988
滚花头不脱出螺钉
Knurled Thumb Screws With Waisted Shank
供应商(1)
5 机床夹具零件及部件 活动手柄压紧螺钉 [国标]
GB /T 2163 - 1991
机床夹具零件及部件 活动手柄压紧螺钉
The Parts And Units Of Jigs And Fixtures.movable Handle Holddown Screw
6 塑料滚花头螺钉 [国标]
GB /T 840 - 1988
塑料滚花头螺钉
Plastic diamond knurlhead screws
7 滚花高头台阶螺钉 [德标]
DIN 464 - 2006
滚花高头台阶螺钉
Knurled Thumb Screws, High Type
供应商(3)
8 薄型滚花手拧螺钉 [德标]
DIN 653 - 2006
薄型滚花手拧螺钉
Knurled Thumb Screws, Low Type
供应商(2)
9 粗牙不脱出螺栓和螺钉 - 滚花高头台阶螺钉 [德标]
DIN 7964 (F) - 1990
粗牙不脱出螺栓和螺钉 - 滚花高头台阶螺钉
Reduced shanke bolts and screws with coarse thread - Knurled Thumb Screws, High Type
供应商(5)
10 滚花高头台阶螺钉 [德标]
DIN 464 - 1986
滚花高头台阶螺钉
Knurled Thurmb Screws, High Type
供应商(3)
11 高型开槽滚花头螺钉 [德标]
DIN 465 - 1963
高型开槽滚花头螺钉
Slotted knurled screws-High style
供应商(1)
12 套式铣刀刀杆用铣刀紧固螺丝, 十字头螺钉(手拧螺钉) [德标]
DIN 6367 - 2003
套式铣刀刀杆用铣刀紧固螺丝, 十字头螺钉(手拧螺钉)
Cutter Retaining Screws For Milling Machine Arbors
13 圆柱头调节支承 [机械行业]
JB /T 8026.3 - 1999
圆柱头调节支承
Adjustable Cylindor Head Supporters
14 带孔滚花螺钉 [机械行业]
JB /T 9162.14 - 1999
带孔滚花螺钉
Knurled Screws With Radial Holes
15 压紧螺钉 [机械行业]
JB /T 9162.15 - 1999
压紧螺钉
Clamping Screw
16 滚花圆柱头螺钉 [机械行业]
JB /T 9162.16 - 1999
滚花圆柱头螺钉
Knurled Head Cap Screws
17 滚花头台阶螺钉 [法国]
NF E 27-170 - 1974
滚花头台阶螺钉
Knurled Thurmb Screws
18 T形旋柄螺钉 [台湾]
CNS 4658 - 1984
T形旋柄螺钉
Rotary Handle Screws - T Type
19 滚花头不脱出螺钉 [航天]
QJ 2381 - 1992
滚花头不脱出螺钉
Knurled thumb screws with waisted shank
20 滚花高头螺钉 [航天]
QJ 2384 - 1992
滚花高头螺钉
Knurled thumb screws
注:技术数据仅供参考,以官方原件为准!
© 易紧通 服务热线:4006-164580(免长途费)