牌号 | Q345R |
对应标准 | GB /T 713.2-2023
承压设备用钢板和钢带 第2部分: 规定温度性能的非合金钢和合金钢 Steel plate, sheet and strip for pressure equipments - Part 2: Non-alloy and alloy steel with specified temperature properties |
归类 | 合金钢 |
说明 | • 本文件适用于制造使用温度不低于-20℃、 承压设备用厚度不大于25. 4 mm的钢带及卷切钢板和厚度为3 mm~250 mm的单轧钢板。 |
厚度 /mm | 试验温度/°C | ||||||||
100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | |
ReL(或Rp0.2)/MPa, ≥ | |||||||||
>20~36 | 295 | 275 | 255 | 235 | 215 | 200 | 190 | 180 | - |
>36~60 | 285 | 260 | 240 | 220 | 200 | 185 | 175 | 165 | - |
>60~100 | 275 | 250 | 225 | 205 | 185 | 175 | 165 | 155 | - |
>100~150 | 260 | 240 | 220 | 200 | 180 | 170 | 160 | 150 | - |
>150~250 | 245 | 230 | 215 | 195 | 175 | 165 | 155 | 145 | - |
材料牌号对应供应商