DIN EN ISO 8741 - 1998 Grooved Pins - Half-length Reverse-taper Grooved

Unit: 毫米(mm)

Nominal Diameter
d

Φ1.5

Φ2

Φ2.5

d	max=nominal size
d	min
c	≈
Minimum Double Shear,kN
d₁ ^③	tol.

1.5	2	2.5
1.475	1.975	2.475
0.2	0.25	0.3
1.6	2.84	4.4
+0.05	+0.05	±0.05

d₁

①,The grooving angle "a" applies only to grooved pins made from steel (a≈70°). The grooving angle may be modified depending on resilience of material.
②,Material a) Steel (St), hardness 125 HV30 to 245 HV30 b) Austenitic stainless steel A1 according to ISO 3506-1 hardness 210 HV30 to 280 HV30
③,The expanded diameter d1 applies only to pins made from steel as shown in standard. For other materials, for example stainless steel, a reduction amount shall be subtracted from the given values and should be agreed between customer and supplier.

GB /T 13829.5 - 2004

Groovd pins-Full-length taper grooved

GB /T 13829.6 - 2004

Grooved Pins - Half-Length Taper Grooved

GB /T 13829.7 - 2004

Grooved pins-Half-length reverse-taper grooved

GB /T 13829.2 (A) - 1992

Grooved pins-taper grooved ，A-style

GB /T 13829.2 (B) - 1992

Grooved pins-half-length taper grooved

GB /T 13829.2 (C) - 1992

Grooved pins-Half-length reverse-taper grooved

DIN 1471 - 1978

Grooved pins, Full Length Taper Grooved

DIN 1472 - 1978

Grooved Pins, Half Length Taper Grooved

DIN 1474 - 1978

Grooved pins-Half-length reverse-taper grooved

ISO 8741 - 1997

Grooved Pins-Half-Length Reverse-Taper Grooved

ISO 8744 - 1997

Groovd Pins-Full-Length Taper Grooved

ISO 8745 - 1997

Grooved Pins-Half-Length Taper Grooved

ASME/ANSI B 18.8.100M - 2000 (R2005)

Grooved pins with half-length taper grooved, metric series

ASME/ANSI B 18.8.100M - 2000 (R2005)

Metric series grooved pins with full-length taper grooved

ASME/ANSI B 18.8.100M - 2000 (R2005)

Metric grooved pins — Half-length reverse-taper grooved

EN 28741 - 1992

Grooved Pins - Half-length Reverse-taper Grooved

NF E 25-762 - 1997

Grooved Pins. Half-Length Reverse-Taper Grooved

NF E 25-764 - 1997 (R2002)

Grooved Pins-Full-Length Taper Grooved

NF E 25-765 - 1997

Grooved Pins - Half-Length Taper Grooved

SAE J 494 (A) - 2004

Grooved Straight Pins - Type A

SAE J 494 (B) - 2004

Grooved Straight Pins - Type B

SAE J 494 (D) - 2004

Grooved Straight Pins - Type D

DIN EN ISO 8744 - 1998

Groovd Pins - Full-Length Taper Grooved

DIN EN ISO 8745 - 1998

Grooved Pins, Half-Length Taper Grooved

EN ISO 8741 - 1997

Grooved Pins - Half-Length Reverse-Taper Grooved

ASME B 18.8.2 - 2020

Grooved Pins - Type A

ASME B 18.8.2 - 2000 (R2010)

Grooved Pins - ype A

GB	GB /T 13829.7
ISO	ISO 8741
DIN	DIN EN ISO 8741
Some of the above standards may be approximate equivalent. If there is any objection, the standard original shall prevail.