Locking threads with 30 degree wedge ramp
Miniature screw threads : Profiles , general plan and basic dimensions
General purpose metric screw threads - Tolerances
The blank diameters for rolling general purpose metric screw threads
Dryseal pipe threads with the thread angle of 60 degrees
Internal thread for wire thread inserts
Buttress Thread with the Flank Angles of 3 and 30 Degrees - Part 1: Profiles
Metric threads where pressure-tight joints are made on the threads
General purpose metric screw threads - Limits of sizes
Unified screw threads - General plan
Trapezoidal screw threads - Part 1: Profiles
General purpose metric screw threads - The plan for pipe systems
General purpose metric screw threads-Basic profile（ISO 68-1:1998, MOD）
General purpose metric screw threads - Basic dimenslons
General purpose metric screw threads - Limit deviations
General purpose metric screw threads - Preferable plan
General purpose metric screw threads - Limits of sizes for the screw threads of medium quality and preferable plan
General purpose metric screw threads - Limits of sizes for the screw threads of coarse quality and preferable plan
Tapping screws thread
Pipe Threads with 55 Degree Thread Angle where Pressure-Tight Joints are not Made on the Threads
Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Parallel internal and taper external threads（eqv ISO 7-1:1994）
Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Taper internal and external threads（eqv ISO 7-1:1994）
The interference-fit threads
Run-outs, undercuts and chamfers for general purpose metric screw threads (ISO 3508:1976 / ISO 4755:1983)
The threads for transition fit
Pipe threads where pressure-tight joints are made on the threads
Screws thread shanks for thread forming screw-Metric coarse thread series
Specification for wood screws
Metric triangle lock with thread end
Metric Self-tapping Thread End
Whitworth pipe threads for pipe unions
Plastic threads
Threads and thread ends for tapping screws
ISO - Metric Trapezoidal Screw Threads
Thread and thread ends for wood screws
Aerospace - Lead and runout threads - Part 1: Rolled external threads
ISO metric trapezoidal screw threads - Basic and design profiles
ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data
Fasteners─Bolts,screws and studs─Nominal lengths and thread lengths
ISO inch screw threads─Basic dimensions
Pipe threads where pressure-tight joints are not made on the threads
Tapping Screws Thread
ISO general purpose metric screw threads - General plan
ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
Limits of sizes for general purpose external and internal screw threads
Deviations for constructional screw threads
ISO general-purpose metric screw threads─Basic dimensions
Tapping Screw Threads and Ends
Tapping screw threads and ends
Limits of sizes and tolerances for metric coarse screw threads
Tapping Screw Threads and Ends
Locking Thread with 30° wedge ramp
Dimensions of Threads and Points for Type AB and Type ABR Thread-forming Screws
Dimensions of Threads and Points for Type B and BP Thread-Forming Tapping Screws
Dimensions of Threads and Points for Type A Thread-Forming Tapping Screws
Lag screw threads
AB self-tapping teeth
self-tapping teeth-B
Self-tapping teeth-BF
Triangle lock self-tapping teeth--D、F、G
Threaded rods(inch series) (F568M, A193/A193M, F738M, F468M)
Wood thread
Thread and body dimeters for wood screws
Wood thread
US triangle lock thread-S type
Metric triangle lock thread-S type
Metric triangle lock thread-C type
Metric triangle lock thread-B type
Metric triangle lock thread-P type
![Thread and point details for Type Y thread cutting screws [TABLE 6]](https://imgcc.164580.com/upload/48/standard/2020/07/27/1595832347314908017.jpg)
Thread and point details for Type Y thread cutting screws [TABLE 6]
![Thread and point details for Type A threads [TABLE 23]](https://imgcc.164580.com/upload/48/standard/2020/07/27/1595832360911151243.jpg)
Thread and point details for Type A threads [TABLE 23]
Screw Threads - UNJ Profile, Inch
Tapping thread for nylon lock
![Type AB, Thread Forming Tapping Screws [Table 5]](https://imgcc.164580.com/upload/48/standard/2020/06/05/1591317360834420064.jpg)
Type AB, Thread Forming Tapping Screws [Table 5]
![Type B and BP, Thread Forming Tapping Screws [Table 6]](https://imgcc.164580.com/upload/48/standard/2020/06/05/1591320423186423886.jpg)
Type B and BP, Thread Forming Tapping Screws [Table 6]
![Type A, Thread Forming Tapping Screws [Table E1]](https://imgcc.164580.com/upload/48/standard/2020/06/05/1591335372316173922.jpg)
Type A, Thread Forming Tapping Screws [Table E1]
![Typ C, Thread Forming Tapping Screws [Table V1]](https://imgcc.164580.com/upload/48/standard/2020/06/05/1591336468116882086.jpg)
Typ C, Thread Forming Tapping Screws [Table V1]
