DIN 6885-1 (B) - 2021 Parallel Keys, Deep Pattern - Type B

Unit: 毫米(mm)

Normal size
b

h
d₁	min
	max
b	Shaft Groove	Nominal Size
	(P9)	min
		max
	(N9)	min
		max
t₁	Shaft Groove	min=nominal size
		max
b₁	Hub Groove	Nominal Size
	(P9)	min
		max
	(JS9)	min
		max
t₂	Hub Groove,loose	min=nominal size
		max
	Hub Groove,Tight	min=nominal size
		max
d₂	min

2	3	4
6	8	10
8	10	12
2	3	4
1.969	2.969	3.958
1.994	2.994	3.988
1.971	2.971	3.97
1.996	2.996	4
1.2	1.8	2.5
1.3	1.9	2.6
2	3	4
1.969	2.969	3.958
1.994	2.994	3.988
1.9875	2.9875	3.985
2.0125	3.0125	4.015
1	1.4	1.8
1.1	1.5	1.9
0.5	0.9	1.2
0.6	1	1.3
d1 + 2.5	d1 + 3.5	d1 + 4

per 1000 units ≈ kg(7.85kg/cm3)

GB /T 1096 - 2003

Square And Rectangular Keys

GB /T 1097 - 2003

Square And Rectangular Keys

GB /T 1567 - 2003

Sguare And Rectangular Thin Keys

GB /T 1096 - 1979

Square and Rectangular keys

GB 1097 - 1979

Square And Rectangular Keys

GB 1567 - 1979

Sguare And Rectangular Thin Keys

DIN 6885-1 (A) - 2021

Parallel Keys, Deep Pattern - Type A
Suppliers(1)

DIN 6885-1 (F) - 2021

Parallel Keys, With Two Step Bores For Fixation Screw - Type F

DIN 6880 (A) - 2011

Square Key

DIN 6880 (B) - 2011

Rectangular Key

DIN 6880 - 1975

Square Key

DIN 6880 - 1975

Rectangular Key

DIN 6885 (B) - 1968

Parallel Keys, Deep Pattern - Type B

DIN 6885 (F) - 1968

Parallel Keys, With Two Step Bores For Fixation Screw - Type F

DIN 6885 (A) - 1968

Parallel Keys, Deep Pattern - Type A
Suppliers(1)

DIN 6885-1 (C) - 2021

Parallel Keys, with Step Bore Fore Fixation Screw - Type C

DIN 6885-1 (D) - 2021

Parallel Keys,With Step Bore Fore Fixation Screw - Type D

DIN 6885-1 (E) - 2021

Parallel Keys, With Two Step Bores For Fixation Screw - Type E

DIN 6885-1 (G) - 2021

Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G

DIN 6885-1 (H) - 2021

Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H

DIN 6885-1 (J) - 2021

Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J

DIN 6880 (C) - 2011

Flat Rectangular Key

DIN 6323 (A) - 2003

Slot stones, loose - Form A

DIN 6323 (B) - 2003

Slot stones, loose - Form B

DIN 6323 (C) - 2003

Slot stones, loose - Form C

DIN 6880 - 1975

Flat Rectangular Key

DIN 6885 (C) - 1968

Parallel Keys, with Step Bore Fore Fixation Screw - Type C

DIN 6885 (D) - 1968

Parallel Keys,With Step Bore Fore Fixation Screw - Type D

DIN 6885 (E) - 1968

Parallel Keys, With Two Step Bores For Fixation Screw - Type E

DIN 6885 (G) - 1968

Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G

DIN 6885 (H) - 1968

Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H

DIN 6885 (J) - 1968

Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J

ISO 2491 - 1974

Thin Parallel Keys

Q 551

Parallel key

ASME/ANSI B 18.25.3M - 1998

Metric Interference Fit Flat Key

ASME/ANSI B 18.25.3M - 1998 (R2008)

Metric Square And Pectang-Ular Keys

ASME/ANSI B 18.25.1M - 1996

Metric square keys

UNI 6604 - 1969

Flat key

UNI 7510 - 1976

Thin parallel keys

UNI 6605 - 1969

Parallel keys - Type I

UNI 6605 - 1969

Parallel keys - Type II

UNI 6605 - 1969

Parallel keys - Type III

UNI 6605 - 1969

Parallel keys - Type IV

UNI 6605 - 1969

Parallel keys - Type V

UNI 6605 - 1969

Parallel keys - Type VI

GOST 23360 - 1978

Keys couplings with prismatic Keys

IS 2048 (A) - 1983

Type A - Keys with both ends round

IS 2048 (B) - 1983

Type B - Keys with both ends square

IS 2048 (C) - 1983

Type C - keys with both ends round with hole for one retaining screw

IS 2048 (D) - 1983

Type D - keys with both ends square with hole for one retaining screw

IS 2048 (E) - 1983

Type E - Keys with both ends round with holes for two retaining screws

IS 2048 (F) - 1983

Type F - Keys with both ends square with holes for two retaining screws

IS 2048 (G) - 1983

Type G - keys with both ends square with chamfer and hole for one retaining screw

IS 2048 (H) - 1983

Type H - Keys with both ends square with chamfer and holes for two retaining screws

IS 2048 (J) - 1983

Type J - keys with both ends square with chamfer and hole for one spring dowel sleeve

GB /T 1096 - 2003

GB /T 1097 - 2003

GB /T 1567 - 2003

GB /T 1096 - 1979

GB 1097 - 1979

GB 1567 - 1979

DIN 6885-1 (A) - 2021

DIN 6885-1 (F) - 2021

DIN 6880 (A) - 2011

DIN 6880 (B) - 2011

DIN 6880 - 1975

DIN 6880 - 1975

DIN 6885 (B) - 1968

DIN 6885 (F) - 1968

DIN 6885 (A) - 1968

DIN 6885-1 (C) - 2021

DIN 6885-1 (D) - 2021

DIN 6885-1 (E) - 2021

DIN 6885-1 (G) - 2021

DIN 6885-1 (H) - 2021

DIN 6885-1 (J) - 2021

DIN 6880 (C) - 2011

DIN 6323 (A) - 2003

DIN 6323 (B) - 2003

DIN 6323 (C) - 2003

DIN 6880 - 1975

DIN 6885 (C) - 1968

DIN 6885 (D) - 1968

DIN 6885 (E) - 1968

DIN 6885 (G) - 1968

DIN 6885 (H) - 1968

DIN 6885 (J) - 1968

ISO 2491 - 1974

Q 551

ASME/ANSI B 18.25.3M - 1998

ASME/ANSI B 18.25.3M - 1998 (R2008)

ASME/ANSI B 18.25.1M - 1996

UNI 6604 - 1969

UNI 7510 - 1976

UNI 6605 - 1969

UNI 6605 - 1969

UNI 6605 - 1969

UNI 6605 - 1969

UNI 6605 - 1969

UNI 6605 - 1969

GOST 23360 - 1978

IS 2048 (A) - 1983

IS 2048 (B) - 1983

IS 2048 (C) - 1983

IS 2048 (D) - 1983

IS 2048 (E) - 1983

IS 2048 (F) - 1983

IS 2048 (G) - 1983

IS 2048 (H) - 1983

IS 2048 (J) - 1983

ASME B 17.1 (USAS B17.1) - 1967 (R2013)