会员中心 | English | 繁體中文

米制开槽盘头自攻螺钉和弹垫组合 SEMS [Table 2] ASME/ANSI B 18.13.1M - 2011

选择规格尺寸点击↓

ST2.9

ST3.5

ST4.2

ST4.8

ST5.5

ST6.3

ST8

ST9.5

ASME/ANSI B 18.13.1M - 2011 米制开槽盘头自攻螺钉和弹垫组合 SEMS [Table 2]

尺寸单位: mm

美标ASME/ANSI B18.13.1M - 2011 ASME/ANSI18 米制开槽盘头自攻螺钉和弹垫组合 SEMS [Table 2]

扫一扫分享

公差

螺纹尺寸
d

ST2.9

ST3.5

ST4.2

ST4.8

ST5.5

ST6.3

ST8

ST9.5

P	螺距
d₁	最大值
d₁	最小值
h	最小值
d_c	最大值
d_c	最小值
d_k	最大值
d_k	最小值
k	最大值
k	最小值
n	最小值
n	最大值
t	最小值

1.1	1.3	1.4	1.6	1.8	1.8	2.1	2.1
2.57	3.08	3.66	4.11	4.78	5.52	7.06	8.59
2.44	2.95	3.50	3.96	4.60	5.31	6.86	8.38
0.79	0.86	0.79	1.42	1.42	1.57	1.98	2.39
5.10	6.43	7.82	8.43	9.09	11.82	13.61	15.95
4.83	6.09	7.47	8.07	8.71	11.41	13.21	15.54
5.60	7.00	8.00	9.50	11.00	12.00	16.00	20.00
5.30	6.60	7.60	9.10	10.60	11.60	15.60	19.50
1.80	2.10	2.40	3.00	3.20	3.60	4.80	6.00
1.60	1.90	2.20	2.70	2.90	3.30	4.50	5.70
0.86	1.06	1.26	1.26	1.66	1.66	2.06	2.56
1.00	1.20	1.51	1.51	1.91	1.91	2.31	2.81
0.70	0.80	1.00	1.20	1.30	1.40	1.90	2.40

引用参考

GB /T 1172 - 1999

黑色金属硬度及强度换算值

GB /T 5267.1 - 2002

镀锌、镀镍、镀镉、复合镀等层镀层盐雾腐蚀的防护性能

GB /T 193 - 2003

普通螺纹（一般用途米制螺纹）- 直径与螺距系列 (ISO 261: 1998, MOD)

类似标准及供货信息

1	[国标] GB /T 9074.18 (S2) - 2017	十字槽盘头自攻螺钉和平垫组合 Cross Recessed Pan Head Tapping Screws And Plain Washer Assemblies 供应商(1)
2	[国标] GB /T 9074.18 (S2) - 2002	十字槽盘头自攻螺钉和平垫组合 Cross Recessed Pan Head Tapping Screws And Plain Washer Assemblies 供应商(1)
3	[国标] GB /T 9074.18 (S2) - 1988	十字槽盘头自攻螺钉和平垫组合 Cross recessed pan head tapping screws and plain washer assemblies 供应商(1)
4	[国标] GB 9074.19 - 1988	十字槽盘头自攻螺钉和大垫圈组合件 Cross Recessed Pan Head Tapping Screw And Large Plain Washer Assemblies 供应商(1)
5	[国标] GB /T 9074.18 (S3) - 2017	开槽盘头自攻螺钉和平垫组合 Slotted pan head tapping screws and plain washer assemblies
6	[国标] GB /T 9074.18 (S3) - 2002	开槽盘头自攻螺钉和平垫组合 Slotted pan head tapping screws and plain washer assemblies
7	[德标] DIN 6901 - 1990	自攻钉与垫圈组合件 Tapping screw and washer assemblies
8	[国际] ISO 10510 (S2) - 2011	十字槽盘头自攻螺钉和平垫组合 Cross Recessed Pan Head Tapping Screw With Plain Washers 供应商(1)
9	[国际] ISO 10510 (S2) - 1999	十字槽盘头自攻螺钉和平垫组合 Cross Recessed Pan Head Tapping Screw And Plain Washer Assmblies 供应商(1)
10	[国际] ISO 10510 (S3) - 2011	开槽盘头自攻螺钉和平垫组合 Slotted Pan Head Tapping Screws With Plain Washer
11	[日标] JIS B 1129 - 1999	十字槽盘头自攻螺钉和平垫组合 Cross recessed tapping screw and plain washer assmblies
12	[汽标代号] Q 220	十字槽盘头自攻钉与平垫组合 Cross recessed pan head tapping screws and plain washers assemblies 供应商(1)
13	[汽标代号] Q 220B	十字槽盘头自攻螺钉和平垫组合 Cross recessed pan head tapping screws and plain washer assemblies 供应商(1)
14	[汽标代号] Q 221	十字槽盘头自攻螺钉与大平垫组合 Cross recessed pan head tapping screws and large plain washers assemblies 供应商(2)
15	[汽标代号] Q 221B	十字槽盘头自攻螺钉和大平垫组合 Cross recessed pan head tapping screws and large plain washer assemblies 供应商(2)
16	[法国] NF E 25-523 - 1999	十字槽盘头自攻螺钉和平垫组合 Cross Recessed Pan Head Tapping Screw And Washers Assemblies With Plain Washers
17	[原电子工业部] SJ 2839 - 1987	十字槽圆头自攻钉和外齿锁紧垫圈组合 Cross Recessed Round Head Tapping Screws with Lock Washers External Teeth Assembly 供应商(1)
18	[原电子工业部] SJ 2838 - 1987	十字槽大球面头自攻螺钉和平垫圈组合
19	[德标] DIN EN ISO 10510 (S2) - 2011	十字槽盘头自攻钉与垫圈组合件 Cross-recessed Pan Head Tapping Screws and Washer Assemblies with Plain Washers
20	[德标] DIN EN ISO 10510 (S3) - 2011	开槽盘头自攻螺钉和平垫组合 Slotted Pan Head Tapping Screws With Plain Washer
21	[美标] ASME B 18.13 - 2017	开槽盘头自攻螺钉和弹垫组合SEMS [Table 3] Slotted Pan Head Tapping Screw and Spring Washer Assemblies-SEMS (Type B Tapping Screw Thread Diameter)

注：技术数据仅供参考，以官方原件为准！