K型开口挡圈 YJT 7002 - 2012
| 选择规格尺寸 点击↓ 2.79 3.56 4.78 6.35 7.92 9.53 10.31 12.7 15.09 20.62 26.21 31.75 35.71 41.28 |
尺寸单位:
mm |
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
类似标准及供货信息
| 1 |
|
[国标] GB /T 896 - 2020 |
开口挡圈 “E” Rings 供应商(14) |
| 2 |
|
[国标] GB 896 - 1986 |
开口挡圈 “E” Rings/Lock Washers (Retaining Washers For Shafts) 供应商(14) |
| 3 |
|
[德标] DIN 6799 - 2017 |
开口挡圈 Retaining Washers For Shafts 供应商(13) |
| 4 |
|
[德标] DIN 6799 (D1500/RA/DE) - 2011 |
开口挡圈 Lock washers (retaining washers for shafts) 供应商(13) |
| 5 |
|
[德标] DIN 6799 (D1500/RA/DE) - 1981 |
开口挡圈 Lock washers (retaining washers for shafts) 供应商(13) |
| 6 |
|
[日标] JIS B 2804 (ER) - 2010 |
E型, 开口挡圈 Lock Washers (Retaining Washers For Shafts) 供应商(5) |
| 7 |
|
[日标] JIS B 2804 (ER) - 2001 |
E型开口挡圈 Lock washers (retaining washers for shafts) 供应商(5) |
| 8 |
|
[日标] JIS B 2805 - 1978 |
开口挡圈 - E形 Retaining Rings - E Type |
| 9 |
|
[汽标代号] Q 436 |
E型开口挡圈 Lock washers (retaining washers for shafts) 供应商(3) |
| 10 |
|
[意大利] UNI 7434 |
开口挡圈，E型 Retaining Rings For Shafts, Type E 供应商(2) |
| 11 |
|
[台湾] CNS 9076 - 1996 |
开口挡圈 Split Washers |
| 12 |
|
[企标] YJT 7001 |
C型开口挡圈 C type split washers |
| 13 |
|
[企标] YJT 7003 |
U型开口挡圈 U type split washers |
| 14 |
|
[企标] YJT 7006 (9133/NRL) |
开口挡圈 9133/NRL split washers 9133/NRL |
| 15 |
|
[企标] YJT 7014 (M1800/H/DC) |
新月形开口挡圈 M1800/H/DC Retaining rings (crescent type) M1800/H/DC |
| 16 |
|
[企标] YJT 7027 (N1500/NRA/NRF/NRG) |
英制E形开口挡圈 (N1500/NRA/NRF/NRG) |
| 17 |
|
[企标] YJT 7028 (N1501/NRJ/NRX) |
英制鞍形开口挡圈 (N1501/NRJ/NRX) Bowed retaining rings(imperial standard) (N1501/NRJ/NRX) |
| 18 |
|
[企标] YJT 7029 (N1504/NKP) |
英制蹄形开口挡圈 (N1504/NKP) Kliprings (U-shaped) (N1504/NKP) |
| 19 |
|
[企标] YJT 7030 (N1540/NRH) |
英制加强型E形开口挡圈 (N1540/NRH) |
| 20 |
|
[企标] YJT 7031 (N1800/NH) |
英制新月开口挡圈 (N1800/NH） Retaining rings (imperial standard) - crescent type (N1800/NH） |
| 21 |
|
[美国军标] MS 3125 (C) - 2011 |
轴用开口挡圈 Lock washers (retaining washers for shafts) |
| 22 |
|
[美国军标] MS 3215 (C) - 2011 |
E形 轴用 开口挡圈 E Ring, retaining, external, reinforced (reduced section type) |
| 23 |
|
[美标] ANSI B 27.7 (3CM1) - 1977 (R2017) |
米制开口挡圈 - 3CM1 Metric E-Ring external Retaining Rings - 3CM1 |
| 24 |
|
[美标] ASME B 18.27.1 (T8) - 1998 (R2017) |
NA3 E形挡圈 NA3 External Retaining Rings - Type E |
| 25 |
|
[美标] ASME B 18.27.2 (T7) - 1998 (R2017) |
NA5 加强型E形挡圈 NA5 External Retaining Rings，Reinforced E-Tvpe |
| 26 |
|
[美标] ASME B 18.27.2 (T8) - 1998 (R2017) |
NA6 C形挡圈 NA6 External Retaining Rings - Type C |
| 27 |
|
[美标] ASME B 18.27.3 (T6) - 1998 (R2017) |
NA9 鞍型E形挡圈 NA9 External Retaining Rings - Type E |