index
logo

圆锥销 EN 22339 - 1992

选择规格尺寸 点击↓

Φ0.6

Φ0.8

Φ1

Φ1.2

Φ1.5

Φ2

Φ2.5

Φ3

Φ4

Φ5

Φ6

Φ8

Φ10

Φ12

Φ16

Φ20

Φ25

Φ30

Φ40

Φ50

EN  22339 - 1992 圆锥销

尺寸单位: mm
欧标EN 22339 - 1992 EN22339 22339EN 圆锥销
EN  22339 - 1992 圆锥销
扫一扫分享
千件重及价格计算 千件重 : kg x 元/kg = 元/千件
默认密度 g/cm3
公称长度L 注:选择后获得 相应重量
公称直径
d
Φ0.6 Φ0.8 Φ1 Φ1.2 Φ1.5 Φ2 Φ2.5 Φ3 Φ4 Φ5
d 最大值
最小值
a
0.6 0.8 1 1.2 1.5 2 2.5 3 4 5
0.56 0.76 0.96 1.16 1.46 1.96 2.46 2.96 3.952 4.952
0.08 0.1 0.12 0.16 0.2 0.25 0.3 0.4 0.5 0.63
千件钢制重≈kg
- - - - - - - - - -
公称直径
d
Φ6 Φ8 Φ10 Φ12 Φ16 Φ20 Φ25 Φ30 Φ40 Φ50
d 最大值
最小值
a
6 8 10 12 16 20 25 30 40 50
5.952 7.942 9.942 11.93 15.93 19.916 24.916 29.916 39.9 49.9
0.8 1 1.2 1.6 2 2.5 3 4 5 6.3
千件钢制重≈kg
- - - - - - - - - -
①,R=a/2+d+(0.02L)²/8a
替代列表
暂无
等效标准
国标 GB 国际 ISO 德标 DIN 欧标 EN
GB /T 117
ISO 2339
DIN EN 22339
EN 22339
以上有部分标准可能为近似等效,如有异议以标准原件为准

技术条件和引用标准

材料
表面处理
表面缺陷
锥度
验收及包装
St = 易切削钢
硬度 125 to 245 HV
其他材料由供需双方协议
* plain , i.e. pins to be supplied in natural finish treated with a rust-preventative lubricant, unless otherwise specified by agreement between customer and supplier.
* Preferred coatings are black oxide, phosphate coating or zinc plating with chromate conversion coating (see ISO 2081 and ISO 4520).
* Other coatings as agreed between customer and supplier.
* All tolerances shall apply prior to the application of a plating or coating.
Parts shall be uniform in quality and free of irregularities or detrimental defects .No burrs shall appear on any part of the pin.
The Taper shall be inspected by use of an adequate optical comparator.
ISO 3269
类似标准及供货信息
1 圆锥销 [国标]
GB /T 117 - 2000
圆锥销
Taper Pins
供应商(6)
2 圆锥销 [国标]
GB 117 - 1986
圆锥销
Taper Pins
供应商(6)
3 球面端圆锥销 [德标]
DIN 1 - 1981
球面端圆锥销
Taper Pins With Round End
供应商(2)
4 不淬硬圆锥销 A型和B型 [国际]
ISO 2339 - 1986
不淬硬圆锥销 A型和B型
Taper Pins, Unhardened - Type A and B
5 圆锥销 [日标]
JIS B 1352 - 1988
圆锥销
Taper Pins
6 过盈配合圆锥销 [日标]
JIS B 1352 - 1988
过盈配合圆锥销
Taper Pins
7 圆锥销 [汽标代号]
Q 525
圆锥销

8 圆锥销 [意大利]
UNI 7283 - 1974
圆锥销
Taper Pins
9 不淬硬球面端圆锥销 [意大利]
UNI 129
不淬硬球面端圆锥销
Taper Pins, Unhardened
10 不淬硬圆锥销 [法国]
NF E 25-752 - 1992 (R2002)
不淬硬圆锥销
Taper Pins, Unhardened
11 球面端圆锥销 [德标]
DIN EN 22339 - 1992
球面端圆锥销
Taper Pins With Round End
12 锥型螺栓 [军标]
GJB 3371 (/79~/82) - 1998
锥型螺栓
Taper bolts
13 圆锥销 【Table 3 -1】 [美标]
ASME B 18.8.2 - 2020
圆锥销 【Table 3 -1】
Taper Pins
14 圆锥销 【Table1】 [美标]
ASME B 18.8.2 - 2000 (R2010)
圆锥销 【Table1】
Taper pins【Table1】
注:技术数据仅供参考,以官方原件为准!
© 易紧通 服务热线:4006-164580(免长途费)