会员中心 | English | 繁體中文

机床夹具零件及部件压紧螺钉 GB /T 2160 - 1991

选择规格尺寸点击↓

M10

M12

M16

M20

M24

M30

尺寸单位: mm

国标GB /T2160 - 1991 GB2160 2160GB 机床夹具零件及部件压紧螺钉

模型下载

扫一扫分享

公差公制螺纹极限尺寸米/英制螺纹对照螺纹直径与受力截面积毛坯直径

螺纹尺寸
d

M10

M12

M16

M20

M24

M30

d₁
d₂
d₃	最小值
	最大值
z
L₁
L₂
L₃
L₄
L₅
SR
SR₁
b
t

2.8	3.5	4.5	6	7	9	12	16	18	18
M4	M5	M6	M8	M10	M12	M16	M20	M24	M24
/	1.5	2	3	4	5	6	6	8	8
/	1.51	2.01	3.01	4.012	5.012	6.012	6.012	8.015	8.015
3	3	4	5	6	7	8	10	12	12
/	/	7	8.5	10	13	15	18	20	20
/	/	2.1	2.5	2.5	2.5	3.4	5	5	5
/	/	2.2	2.6	3.2	4.8	6.3	7.5	8.5	8.5
5	6.5	6.5	9	11	13.5	15	17	20	20
2	3	3	4	5	6.5	8	9	11	11
4	5	6	8	10	12	16	20	25	25
3	4	5	6	7	9	12	16	18	18
0.6	0.8	0.8	1.2	1.5	2	2	3	4	4
1.4	1.8	2	2.5	3	3.5	4.5	6	7	7

工艺相关

技术条件和引用标准

① 材料：45钢按 GB 699 的规定。
② 热处理：HRC30~35。
③ 其他技术条件按 GB/T 2259 的规定。

引用参考

GB /T 1172 - 1999

黑色金属硬度及强度换算值

GB /T 5267.1 - 2002

镀锌、镀镍、镀镉、复合镀等层镀层盐雾腐蚀的防护性能

GB /T 193 - 2003

普通螺纹（一般用途米制螺纹）- 直径与螺距系列 (ISO 261: 1998, MOD)

类似标准及供货信息

1	[国标] GB 1160.2 (A) - 1989	旋入式圆形油标 A型 Oil Level Indicators - Screwing Round Type - Type A 供应商(1)
2	[国标] GB /T 2157 - 1991	机床夹具零部件—多手柄螺母 The parts and units of jigs and fixtures Multiple handle nut
3	[国标] GB /T 2171 - 1991	机床夹具零件及部件光面压块 The Parts and Units of Jigs and Fixtures - Smooth Face Clamp Plate
4	[国标] GB /T 2196 (A/C) - 1991	机床夹具零件及部件 - 钩形压板 A型和C型 The Parts and Units of Jigs and Fixtures - Hook Clamp Plate - Type A and C
5	[国标] GB /T 2196 (B) - 1991	机床夹具零件及部件 - 钩形压板 B型 The Parts and Units of Jigs and Fixtures - Hook Clamp Plate - Type B
6	[国标] GB /T 2197 - 1991	机床夹具零件及部件钩形压板（组合） The Parts and Units of Jigs and Fixtures Hook Clamp Plate (Combinatlon)
7	[国标] GB /T 2198 - 1991	机床夹具零件及部件 - 立式钩型压板（组合） The parts and units of jigs and fixtures - Vertical hook clamp plate(Combination)
8	[国标] GB /T 2199 - 1991	机床夹具零件及部件 - 端面钩形压板（组合） The parts and units of jigs and fixtures - End face hook plate(Combination)
9	[国标] GB /T 2200 - 1991	机床夹具零件及部件 - 侧面钩形压板（组合） The parts and units of jigs and fixtures - Side face hook clamp plate(Combination)
10	[国标] GB /T 2201 - 1991	机床夹具零件及部件定位衬套 The parts and units of jigs and fixtures locating bush
11	[国标] GB /T 2203 - 1991	机床夹具零件及部件固定式定位销 The parts and units of jigs and fixtures ( Fixed locating pin)
12	[国标] GB /T 2205 - 1991	机床夹具零件及部件 - 定位插销 The Parts and Units of Jigs and Fixtures - Aligning Pin
13	[国标] GB 2206 - 1991	机床夹具零件及部件 - 定位键 The parts and units of jigs fixtures - Locating key
14	[国标] GB /T 2220 - 1991	机床夹具零件及部件 - 活动手柄 The Parts and Units of Jigs and Fixtures - Flexible Handle
15	[国标] GB /T 2225 - 1991	机床夹具零件及部件 - 起重螺栓 The Parts and Units of Jigs and Fixtures - Lifting Bolt
16	[国标] GB /T 2230 - 1991	机床夹具零件及部件 - 调节支承 The parts and units of jigs and fixtures Adjustable supporters
17	[国标] GB /T 2234 - 1991	机床夹具零件及部件 - 低支脚 The parts and units of jigs and fixtures - Short legs
18	[国标] GB /T 2256 - 1991	机床夹具零件及部件塑料夹具用六角螺钉 The Parts And Units Of Jigs And Fixtures.hex Screw For Plastic Fixture
19	[国标] GB /T 2257 - 1991	机床夹具零件及部件塑料夹具用内六角螺钉 The Parts And Units Of Jigs And Fixtures.inner Hex Screw For Plastic Fixtures
20	[国标] GB 1160.2 (B) - 1989	旋入式圆形油标 B型 Oil Level Indicators - Screwing Round Type - Type B
21	[国标] GB 3473 - 1983	船用带舌插销 A型 Marine Toggle Pins - Type A
22	[国标] GB 3473 - 1983	船用带舌插销 B型 Marine Toggle Pins - Type B
23	[德标] DIN 71752 - 1994	叉型头, U型头 Fork heads 供应商(1)
24	[德标] DIN 6314 - 2009	普通夹具直边卡箍夹紧块 Clamp, straight
25	[德标] DIN 6315 (B) - 2009	叉形压板夹钳 B型 Clamp, forked - Form B
26	[德标] DIN 6315 (C) - 2009	叉形压板夹钳 C型 Clamp, forked - Form C
27	[德标] DIN 6306 (-2) - 2002	带移动卡式螺栓的定位销钉旋杆 Tommy screws with moveable clamping bolt - bar
28	[德标] DIN 6306 (-3) - 2002	带移动卡式螺栓的定位销钉杆端帽 Tommy screws with moveable clamping bolt - end caps
29	[德标] DIN 6320 - 2002	工装和夹具用螺纹体支脚 Feet With Threaded Shank For Jigs And Fixtures
30	[德标] DIN 6321 - 2002	支撑和定位销 Support And Location Pins
31	[德标] DIN 172 - 1992	导向衬套钻套 A型和B型 Press Fit Jig Bushes, Headed - Form A and B
32	[德标] DIN 1163 - 1973	铸型用销钉 Molding Pins
33	[汽标代号] Q 740	螺纹叉 Threaded Connecting Fork
34	[汽标代号] Q 741	螺纹叉 - 细牙 Threaded Connecting Fork - Fine Thread
35	[汽标代号] Q 742	焊接叉 Weldable Connecting Fork
36	[机械行业] JB /T 7941.2 (A) - 1995	旋入式圆形油标 A型 Oil Level Indicators Screwing Round Type - Type A 供应商(1)
37	[机械行业] JB /T 7934 - 1999	Z1型胀紧联结套 Locking Assemblies，Type Z1
38	[机械行业] JB /T 7934 - 1999	Z2型胀紧联结套 Locking Assemblies，Type Z2
39	[机械行业] JB /T 7934 - 1999	Z3型胀紧联结套 Locking Assemblies，Type Z3
40	[机械行业] JB /T 7934 - 1999	Z4型胀紧联结套 Locking Assemblies，Type Z4
41	[机械行业] JB /T 7934 - 1999	Z5型胀紧联结套 Locking Assemblies，Type Z5
42	[机械行业] JB /T 7934 - 1999	Z6型胀紧联结套 Locking Assemblies，Type Z6
43	[机械行业] JB /T 7934 - 1999	Z7A型胀紧联结套 Locking Assemblies，Type Z7A
44	[机械行业] JB /T 7934 - 1999	Z7B型胀紧联结套 Locking Assemblies，Type Z7B
45	[机械行业] JB /T 7934 - 1999	Z7C型胀紧联结套 Locking Assemblies，Type Z7C
46	[机械行业] JB /T 7934 - 1999	Z8型胀紧联结套 Locking Assemblies，Type Z8
47	[机械行业] JB /T 7934 - 1999	Z9型胀紧联结套 Locking Assemblies，Type Z9
48	[机械行业] JB /T 7934 - 1999	Z10型胀紧联结套 Locking Assemblies，Type Z10
49	[机械行业] JB /T 7934 - 1999	Z11型胀紧联结套 Locking Assemblies，Type Z11
50	[机械行业] JB /T 7934 - 1999	Z12A型胀紧联结套 Locking Assemblies，Type Z12A
51	[机械行业] JB /T 7934 - 1999	Z12B型胀紧联结套 Locking Assemblies，Type Z12B
52	[机械行业] JB /T 7934 - 1999	Z12C型胀紧联结套 Locking Assemblies，Type Z12C
53	[机械行业] JB /T 7934 - 1999	Z13型胀紧联结套 Locking Assemblies，Type Z13
54	[机械行业] JB /T 7934 - 1999	Z15型胀紧联结套 Locking Assemblies，Type Z15
55	[机械行业] JB /T 7934 - 1999	Z16型胀紧联结套 Locking Assemblies，Type Z16
56	[机械行业] JB /T 7934 - 1999	Z17A型胀紧联结套 Locking Assemblies，Type Z17A
57	[机械行业] JB /T 7934 - 1999	Z17B型胀紧联结套 Locking Assemblies，Type Z17B
58	[机械行业] JB /T 7934 - 1999	Z18型胀紧联结套 Locking Assemblies，Type Z18
59	[机械行业] JB /T 7934 - 1999	Z19A型胀紧联结套 Locking Assemblies，Type Z19A
60	[机械行业] JB /T 7934 - 1999	Z19B型胀紧联结套 Locking Assemblies，Type Z19B
61	[机械行业] JB /T 7934 - 1999	Z20型胀紧联结套 Locking Assemblies，Type Z20
62	[机械行业] JB /T 8004.8 (GB 2155) - 1999	机床夹具零件及部件 - 手柄螺母 The Parts And Units Of Jigs And Fixtures Handle Nut
63	[机械行业] JB /T 8004.9 - 1999	机床夹具零件及部件回转手柄螺母 The Parts and Units of Jigs and Fixtures Rotary Handle Nut
64	[机械行业] JB /T 8006.1 - 1999	机床夹具零件及部件 - 压紧螺钉 The Parts and Units of Jigs and Fixtures - Holddown Screws
65	[机械行业] JB /T 8012.3 - 1999	机床夹具零件及部件 - 立式钩型压板（组合） The Parts And Units Of Jigs And Fixtures - Vertical Hook Clamp Plate (Combination)
66	[机械行业] JB /T 8012.4 - 1999	机床夹具零件及部件 - 端面钩形压板（组合） The Parts And Units Of Jigs And Fixtures - End Face Hook Clamp Plate (Combination)
67	[机械行业] JB /T 8012.5 - 1999	机床夹具零件及部件 - 侧面钩形压板（组合） The Parts And Units Of Jigs And Fixtures - Sided Face Hook Clamp Plate (Combination)
68	[机械行业] JB /T 8015 - 1999	机床夹具零件及部件 - 定位插销 The parts and units of jigs and fixtures - Aligning pin
69	[机械行业] JB /T 8026.1 - 1999	六角头支承 Hex head supporting
70	[机械行业] JB /T 8026.4 - 1999	机床夹具零件及部件 - 调节支承 The parts and units of jigs and fixtures Adjustable supporters
71	[机械行业] JB /T 8026.7 - 1999	机床夹具零件及部件 - 自动调节支承 The parts and units of jigs and fixtures - Automatic adjuctable supportors
72	[机械行业] JB /T 7941.2 (B) - 1995	旋入式圆形油标 B型 Oil Level Indicators Screwing Round Type - Type B
73	[机械行业] JB 8004.10 - 1995	机床夹具零部件—多手柄螺母 The parts and units of jigs and fixtures Multiple handle nut
74	[企标] YJT 13009	脚杯 Foot pad 供应商(2)
75	[企标] YJT 13003 (GN 751)	叉形接头 Fork Joints
76	[企标] YJT 13011	万向调节脚
77	[汽标] QC /T 336 - 1999	螺纹叉 Threaded Connecting Fork
78	[汽标] QC /T 337 - 1999	焊接叉 Weldable Connecting Fork
79	[美国军标] MS 35489 - 2012	护线圈 Grommets, synthetic and silicone rubber, hot-oil and coolant resistant
80	[美标] ANSI /ABMA 8.2 - 1999	英制滚珠轴承和滚柱轴承配件锁板 Table 5.3 Lockplate Dimensions Inch Design Series P-000
81	[航空] HB 8069 - 2002	带螺母的角材 Angle With Nuts
82	[航空] HB 863 - 1990	螺纹顶杆
83	[航空] HB 2026 - 1989	表夹
84	[航空] HB 2059 (-2) - 1989	切向夹紧件 - 衬套
85	[航空] HB 2059 - 1989	切向夹紧件
86	[航空] HB 308 - 1971	槽面压块