会员中心 | English | 繁體中文

十字槽盘头自攻钉与平垫组合 Q 220

选择规格尺寸点击↓

ST2.9

ST3.5

ST4.2

ST4.8

ST5.5

尺寸单位: mm

扫一扫分享

公差

螺纹尺寸
d

ST2.9

ST3.5

ST4.2

ST4.8

ST5.5

a	最大值
h	公称
d_c	公称

1.1	1.3	1.4	1.6	1.8
0.8	1	1	1	1.6
6	8	9	10	12

①,除a外，螺钉的其余要求按 Q271、Q272。

替代列表

Q 220 Q 220B

采用标准

GB /T 9074.18 (S2) - 1988

技术条件和引用标准

零件
品种代号
十字槽
表面处理	种类
	标准
验收及包装
-

自攻螺钉	垫圈
Q271(C型)、Q272(F型)	Q421
H型 GB/T 944.1	/
镀锌钝化 Fe/Ep·Zn8
QC/T 625
GB/T 90
垫圈应能自由转动而不脱落

引用参考

GB /T 1172 - 1999

黑色金属硬度及强度换算值

GB /T 5267.1 - 2002

镀锌、镀镍、镀镉、复合镀等层镀层盐雾腐蚀的防护性能

GB /T 193 - 2003

普通螺纹（一般用途米制螺纹）- 直径与螺距系列 (ISO 261: 1998, MOD)

告诉我在“易紧通”看到，将给您优惠

惠州市昇沪汽车紧固件科技有限公司

联系人：黄俊辉

1540428407 移动电话： 13828802165 电话：0752-3951888, 3951820, 3951821, 3951825, 3951826 Email:

登陆后可见

材料：1008钢、1018#碳钢、Q235碳钢、35#合金钢、L6铝、304HC不锈钢、316HC不锈钢，表面处理：环保彩锌、环保蓝白锌、环保黑锌、环保镍、热镀锌、达克罗、以及非环保电镀，规格：齐全

[询价]

类似标准及供货信息

1	[国标] GB /T 9074.18 (S2) - 2017	十字槽盘头自攻螺钉和平垫组合 Cross Recessed Pan Head Tapping Screws And Plain Washer Assemblies 供应商(1)
2	[国标] GB /T 9074.18 (S2) - 2002	十字槽盘头自攻螺钉和平垫组合 Cross Recessed Pan Head Tapping Screws And Plain Washer Assemblies 供应商(1)
3	[国标] GB /T 9074.18 (S2) - 1988	十字槽盘头自攻螺钉和平垫组合 Cross recessed pan head tapping screws and plain washer assemblies 供应商(1)
4	[国标] GB 9074.19 - 1988	十字槽盘头自攻螺钉和大垫圈组合件 Cross Recessed Pan Head Tapping Screw And Large Plain Washer Assemblies 供应商(1)
5	[国标] GB /T 9074.18 (S3) - 2017	开槽盘头自攻螺钉和平垫组合 Slotted pan head tapping screws and plain washer assemblies
6	[国标] GB /T 9074.18 (S3) - 2002	开槽盘头自攻螺钉和平垫组合 Slotted pan head tapping screws and plain washer assemblies
7	[德标] DIN 6901 - 1990	自攻钉与垫圈组合件 Tapping screw and washer assemblies
8	[国际] ISO 10510 (S2) - 2011	十字槽盘头自攻螺钉和平垫组合 Cross Recessed Pan Head Tapping Screw With Plain Washers 供应商(1)
9	[国际] ISO 10510 (S2) - 1999	十字槽盘头自攻螺钉和平垫组合 Cross Recessed Pan Head Tapping Screw And Plain Washer Assmblies 供应商(1)
10	[国际] ISO 10510 (S3) - 2011	开槽盘头自攻螺钉和平垫组合 Slotted Pan Head Tapping Screws With Plain Washer
11	[日标] JIS B 1129 - 1999	十字槽盘头自攻螺钉和平垫组合 Cross recessed tapping screw and plain washer assmblies
12	[汽标代号] Q 220B	十字槽盘头自攻螺钉和平垫组合 Cross recessed pan head tapping screws and plain washer assemblies 供应商(1)
13	[汽标代号] Q 221	十字槽盘头自攻螺钉与大平垫组合 Cross recessed pan head tapping screws and large plain washers assemblies 供应商(2)
14	[汽标代号] Q 221B	十字槽盘头自攻螺钉和大平垫组合 Cross recessed pan head tapping screws and large plain washer assemblies 供应商(2)
15	[美标] ASME/ANSI B 18.13.1M - 2011	米制开槽盘头自攻螺钉和弹垫组合 SEMS [Table 2] Metric Slotted Pan Head Tapping Screw and Spring Washer Assemblies-SEMS (Screws Having Tapping Screw Thread Diameter)
16	[法国] NF E 25-523 - 1999	十字槽盘头自攻螺钉和平垫组合 Cross Recessed Pan Head Tapping Screw And Washers Assemblies With Plain Washers
17	[原电子工业部] SJ 2839 - 1987	十字槽圆头自攻钉和外齿锁紧垫圈组合 Cross Recessed Round Head Tapping Screws with Lock Washers External Teeth Assembly 供应商(1)
18	[原电子工业部] SJ 2838 - 1987	十字槽大球面头自攻螺钉和平垫圈组合
19	[德标] DIN EN ISO 10510 (S2) - 2011	十字槽盘头自攻钉与垫圈组合件 Cross-recessed Pan Head Tapping Screws and Washer Assemblies with Plain Washers
20	[德标] DIN EN ISO 10510 (S3) - 2011	开槽盘头自攻螺钉和平垫组合 Slotted Pan Head Tapping Screws With Plain Washer
21	[美标] ASME B 18.13 - 2017	开槽盘头自攻螺钉和弹垫组合SEMS [Table 3] Slotted Pan Head Tapping Screw and Spring Washer Assemblies-SEMS (Type B Tapping Screw Thread Diameter)

注：技术数据仅供参考，以官方原件为准！