按标准分类
澳标
美标
美标
美标
美标
英标
台湾
德标
欧标
国标
俄标
航空
航天
美标
国际
机械行业
日标
韩标
法国
建筑
汽标代号
意大利
印标
石化
铁道部
化工
电力
压铆件
军标
浙江制造团体标准
深圳紧固件行业协会标准
浙工大
压力容器
船舶
原化工部
原电子工业部
能源行业标准
汽车行业标准
西门子
万禧
按形状特征
[国标]GB /T 31.1 - 2013
六角头螺杆带孔螺栓
Hexagon Bolts With Split Pin Hole On Shank
[国标]GB /T 31.1 - 1988
六角头螺杆带孔螺栓 A和B级
Hexagon bolts with split pin hole on shank A and B
[国标]GB 31.2 - 1988
细杆六角头螺杆带孔螺栓 B级
Hexagon Bolts With Split Pin Hole On Shank-Reduced Shank-Product Grade B
[国标]GB 31.3 - 1988
六角头螺杆带孔螺栓 细牙 A和B级
Hexagon Bolts With Split Pin Hole On Shank-Fine Pitch Thread-Product Grade A and B
[国标]GB 2329 (U) - 1985
U形螺栓 - U型
U - Bolt - Type U
[国标]GB 2329 (UJ) - 1985
U形螺栓 - UJ型
U - Bolt - Type UJ
[国标]GB 23 - 1976
小六角头螺杆带孔螺栓
Bolts, Small Hexagon Head With Hole Through The Shank
[国标]GB 24 - 1976
小六角头螺杆带孔导颈螺栓
Bolts, Small Hexagon Head With Fit Neck And Hole Through The Shank
[汽标代号]Q 173
六角头螺杆带孔螺栓
Hexagon head with hole through the shank
[汽标代号]Q 173B
细牙六角头螺杆带孔螺栓 [细牙普通螺纹]
Hexagon bolts with split pin hole on shank-fine pitch thread
[汽标代号]Q 173C
细牙六角头螺杆带孔螺栓 [较细牙普通螺纹]
Hexagon bolts with split pin hole on shank-fine pitch thread
[国际]ISO 9255 - 2008
12角法兰面螺钉 - 中短MJ螺纹 - 强度等级小于等于1100MPa
Aerospace - Bolts, Normal Spline Head, Normal Shank, Short or Medium Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1100 MPa
[德标]DIN 5526 - 1999
铁路车辆用带头销钉
Pins with head for rail vehicles
[德标]DIN EN 4178 - 2017
航空航天系列 - 二硫化钼（MoS2）阳极氧化处理的，钛合金，中等长度螺纹，粗公差标准柄，六瓣凹槽圆柱头螺钉，等级:1100 MPa（环境温度）/ 315 ℃
Aerospace series Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized
[欧标]EN 4162 - 2016
航空航天用偏十字形凹槽埋头100°螺钉 镀镉合金钢中长度螺纹粗公差.1100MPa(室温)235℃
Aerospace Series-Screws 100° Countersunk Normal Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Medium Length Thread, In Alloy Steel, Cadmium Plated - 1100 MPa (At Ambient Temperature)/235 °C
[欧标]EN 4162 - 2009
航空航天用偏十字形凹槽埋头100°螺钉 镀镉合金钢中长度螺纹粗公差.1100MPa(室温)235℃
Aerospace Series-Screws 100° Countersunk Normal Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Medium Length Thread, In Alloy Steel, Cadmium Plated - 1100 MPa (At Ambient Temperature)/235 °C
[英标]BS 1768 - 1963
精制美制六角头杆部带孔螺栓
Unified Hexagon Head Bolts, Washer Faced
[俄标]GOST 7811 (-2) - 1970
小六角头导颈螺栓 A级，2型
Hexagon reduced head bolts with guide neck product grade A , Type 2
[俄标]GOST 7811 (-5) - 1970
小六角头导颈螺栓 A级，5型
Hexagon reduced head bolts with guide neck product grade A , Type 5
[航天]QJ 2367 - 1992
六角头螺杆带孔螺栓
[航空]HB 8035 - 2002
开槽六角头螺栓
Hexagon Bolts With Recess
[航空]HB 8260 - 2002
开槽六角头螺栓
Hexagon Bolts With Recess
[航空]HB 1- 154 - 1995
锥形螺栓
Tapered bolts
[航空]HB 7196~7199 (7196/7197/7198/7199) - 1995
十字槽100°沉头螺钉（带孔或不带孔）
Cross Recessed 100° Countersunk Head Screws
[航空]HB 1- 154 - 1983
锥形螺栓
Tapered bolts
[航空]HB 1- 304 - 1983
拧入镁铝合金过盈螺纹双头栓
Twist the magnesium alloy over surplus threaded two-headed bolt
[化工]HG /T 21629 (A17) - 1999
松紧螺母
[电力]DL /T 764 - 2014
电力金具用螺杆带销孔六角头螺栓
Hexagon head bolts with split pin hole on shank for electric power fittings
[电力]DL /T 764.1 - 2001
电力金具专用紧固件 - 六角头带销孔螺栓
Electric Power Fitting Fasteners Hexagon Head Bolts With Split Pin Hole On Shank
[军标]GJB 3371 (/1~/9) - 1998
普通螺纹螺栓
Hexagon Bolts with M Thread
[军标]GJB 3371 (/10 ~ /18) - 1998
短螺纹小六角头螺栓
Small Hexagon Bolts with Short M Thread
[军标]GJB 3371 (/19) - 1998
光杆公差带f9六角头螺栓
Hexagon Head Bolts，Shank Tolerance f9
[军标]GJB 3371 (/77~/78) - 1998
光杆公差带r6短螺纹六角头螺栓
Hexagon Head Bolts, Short Thread, Shank Tolerance r6
[军标]GJB 3371 (/20) - 1998
光杆公差带f9短螺纹小六角头螺栓
Small Hexagon Head Bolts, Short Thread, Shank Tolerance r6
[军标]GJB 3371 (/21~/24) - 1998
光杆公差带h8短螺纹小六角头螺栓
Small Hexagon Head Bolts, Short Thread, Shank Tolerance h8
[军标]GJB 3371 (/25~/28) - 1998
铰链连接用光杆公差带f7小六角头螺栓
Small Hexagon Head Bolts, Shank Tolerance f7
[军标]GJB 3371 (/29~/32) - 1998
铰链连接用光杆公差带h6小六角头螺栓
Small Hexagon Head Bolts, Shank Tolerance h6
[军标]GJB 3371 (/69) - 1998
光杆公差带f9短螺纹六角头螺栓
Hexagon Head Bolts, Short Thread, Shank Tolerance f9