会员中心 | English | 繁體中文

弹性圆柱销卷制轻型 DIN EN ISO 8751 - 2007

选择规格尺寸点击↓

Φ1.5

Φ2

Φ2.5

Φ3

Φ3.5

Φ4

Φ5

Φ6

Φ8

尺寸单位: mm

德标DIN EN ISO 8751 - 2007 DIN EN ISO8751 弹性圆柱销卷制轻型

模型下载

扫一扫分享

单重计算公差

公称直径
d

Φ1.5

Φ2

Φ2.5

Φ3

Φ3.5

Φ4

Φ5

Φ6

Φ8

d	装配前	最大值
		最小值
d₂	装配前	最大值
α
s
最小剪切载荷,双面剪,kN ^①	a
	b

1.75	2.28	2.82	3.35	3.87	4.45	5.5	6.55	8.65
1.62	2.13	2.65	3.15	3.67	4.2	5.2	6.25	8.3
1.4	1.9	2.4	2.9	3.4	3.9	4.85	5.85	7.8
0.5	0.7	0.7	0.9	1	1.1	1.3	1.5	2
0.08	0.11	0.14	0.17	0.19	0.22	0.28	0.33	0.45
0.8	1.5	2.3	3.3	4.5	5.7	9	13	23
0.65	1.1	1.8	2.5	3.4	4.4	7	10	18

①,a：适用于钢和马氏体耐腐蚀钢产品。
b：适用于奥氏体不锈钢产品。

替代列表

暂无

等效标准

国标 GB	国际 ISO	德标 DIN	美标 ASME/ANSI
GB /T 879.5	ISO 8751	DIN EN ISO 8751	ANSI/ASME B 18.8.3M(L)

以上有部分标准可能为近似等效，如有异议以标准原件为准

技术条件和引用标准

材料

钢

奥氏体不锈钢

马氏体不锈钢

材料 ^①	-
	-
	-
表面处理
表面缺陷
剪切试验
验收及包装
说明

St（所有直径）	St（可选用 d>12mm）	A	C
化学成分，％
C≥0.64 Mn≥0.60 Si≥0.15 Cr^② P≤0.04 s≤0.05 淬火并回火硬度：420~545 HV 硬度测试按 ISO 6507-1	C≥0.38 Mn≥0.70 Si≥0.20 Cr≥0.80 V≥0.15 P≤0.035 s≤0.04 淬火并回火硬度：420~545 HV 硬度测试按 ISO 6507-1	C≤0.15 Mn≤2.00 Si≤1.50 Cr：16~20 Ni：6~12 P≤0.045 S≤0.03 Mo≤0.8 冷加工	C≥0.15 Mn≤1.00 Si≤1.00 Cr：11.5~14 Ni≤1.00 P≤0.04 S≤0.03 淬火并回火硬度：460~560 HV 硬度测试按 ISO 6507-1
Plain, i.e. pins to be supplied in natural finish, treated with a protective lubricant, unless otherwise specified by agreement between customer and suppller. If pins are surface coated appropriate plating or coating processes should be employed to avoid hydrogen embrittlement.Due to the risk of hydrogen embrittlement, pins should not be electroplated or phosphate-coated. If electroplating or phosphate coating is required for corrosion prevention, by agreement between customer and supplier, it is mandatory that the pins be baked immediately after plating to minimize the risk of hydrogen embrittlement, see also hydrogen embrittlement relief according to ISO 4042. Nevertheless, freedom from hydrogen embrittlement is not absolutely guaranteed. 所有公差仅适用于涂、镀前的公差。		Plain, i.e. pins to be supplied in natural finish.
不允许有不规则的和有害的缺陷。销的任何部位不得有毛刺
ISO 8749
ISO 3269
①其他材料由供需双方协议。 ②Cr的使用，可由制造者任选。

引用参考

GB /T 1172 - 1999

黑色金属硬度及强度换算值

GB /T 5267.1 - 2002

镀锌、镀镍、镀镉、复合镀等层镀层盐雾腐蚀的防护性能

GB /T 193 - 2003

普通螺纹（一般用途米制螺纹）- 直径与螺距系列 (ISO 261: 1998, MOD)

类似标准及供货信息

1	[国标] GB /T 879.3 - 2018	重型卷制弹性圆柱销 Spring-Type Straight Pins-Coiled,Heavy Duty 供应商(5)
2	[国标] GB /T 879.4 - 2018	标准型卷制弹性圆柱销 Spring-Type Straight Pins-Coiled,Standard Duty 供应商(6)
3	[国标] GB /T 879.5 - 2018	轻型卷制弹性圆柱销 Spring-Type Straight Pins-Coiled,Light Duty 供应商(3)
4	[国标] GB /T 879.3 - 2000	重型卷制弹性圆柱销 Spring-Type Straight Pins-Coiled,Heavy Duty 供应商(5)
5	[国标] GB /T 879.4 - 2000	标准型卷制弹性圆柱销 Spring-Type Straight Pins-Coiled,Standard Duty 供应商(6)
6	[国标] GB /T 879.5 - 2000	轻型卷制弹性圆柱销 Spring-Type Straight Pins-Coiled,Light Duty 供应商(3)
7	[德标] DIN 7343 - 1969	卷制弹性圆柱销—标准型 Spring-type parallel pins-Coiled,standard duty 供应商(4)
8	[德标] DIN 7344 - 1969	重型卷制弹性圆柱销 Spirol Pins, Heavy Duty 供应商(2)
9	[国际] ISO 8748 - 2007	重型卷制弹性圆柱销 Spring-Type Straight Pins-Coiled,Heavy Duty 供应商(3)
10	[国际] ISO 8750 - 2007	标准型卷制弹性圆柱销 Spring-Type Straight Pins-Coiled,Standard Duty 供应商(4)
11	[国际] ISO 8751 - 2007	轻型卷制弹性圆柱销 Sping-Type Straight Pins-Coiled,Light Duty 供应商(3)
12	[国际] ISO 8748 - 1997	重型卷制弹性圆柱销 Spring-type Straight Pins - Coiled, Heavy Duty 供应商(3)
13	[国际] ISO 8750 - 1997	标准型卷制弹性圆柱销 Spring-type parallel pins-Coiled,standard duty 供应商(4)
14	[国际] ISO 8751 - 1997	轻型卷制弹性圆柱销 Spring-type Straight Pins - Coiled, Light Duty 供应商(3)
15	[日标] JIS B 2808 (CS) - 2013	标准型卷制弹性圆柱销 [Table 9] Spring Pins, Coiled, Standard Duty 供应商(1)
16	[日标] JIS B 2808 (CS) - 2005	标准型卷制弹性圆柱销 [Table 5] Spring Parallel Pins, Coiled, Standard Duty 供应商(1)
17	[日标] JIS B 2808 (CL) - 2013	轻型卷制弹性圆柱销 [Table 10] Spring Pins, Coiled, Light Duty
18	[日标] JIS B 2808 (CH) - 2013	重型卷制弹性圆柱销 [Table 8] Spring Pins, Coiled, Heavy Duty
19	[日标] JIS B 2808 (CH) - 2005	重型卷制弹性圆柱销 [Table 4] Spring Parallel Pins - Coiled, Heavy Duty
20	[日标] JIS B 2808 (CL) - 2005	轻型卷制弹性圆柱销 [Table 6] Spring Parallel Pins - Coiled, Light Duty
21	[汽标代号] Q 527	卷制螺旋弹性销 Coiled spring pins 供应商(1)
22	[汽标代号] Q 527B (heavy)	卷制弹性圆柱销重型 Spring-Type Straight Pins-Coiled,Heavy Duty 供应商(1)
23	[汽标代号] Q 527B (light)	卷制弹性圆柱销轻型 Spring-Type Straight Pins-Coiled,Light Duty 供应商(1)
24	[汽标代号] Q 527B (standard)	卷制弹性圆柱销标准型 Spring-Type Straight Pins-Coiled,Standard Duty 供应商(1)
25	[美标] ASME/ANSI B 18.8.3M (S) - 1995	米制标准型卷制弹性圆柱销 Metric Coiled Spring Pins-Standard Duty 供应商(3)
26	[美标] ASME/ANSI B 18.8.3M (L) - 1995	米制轻型卷制弹性圆柱销 Spring-type Parallel Pins-metric,Coiled, Light Duty 供应商(1)
27	[美标] ASME/ANSI B 18.8.3M (H) - 1995	米制重型卷制弹性圆柱销 Coiled Spring Pins-Heavy Duty 供应商(1)
28	[美标] ASME/ANSI B 18.8.100M - 2000 (R2005)	米制卷制弹性圆柱销Table1 Metric series spring coiled pins,standard duty
29	[美标] ASME/ANSI B 18.8.100M - 2000 (R2005)	米制轻型卷制弹性圆柱销Table1 Metric coiled spring pins,light duty
30	[美标] ASME/ANSI B 18.8.100M - 2000 (R2005)	米制重型卷制弹性圆柱销Table1 Metric spring coiled pins,heavy duty
31	[欧标] EN 28748 - 1992	重型卷制弹性圆柱销 Spring-type straight pins - coiled, heavy duty
32	[法国] NF E 25-768 - 2007	重型卷制弹性圆柱销 Spring - Type Straight Pins-Coiled, Heavy Duty 供应商(1)
33	[法国] NF E 25-770 - 2007	卷制弹性圆柱销 Spring - Type Straight Pins - Coiled, Standard Duty
34	[法国] NF E 25-771 - 2007	轻型卷制弹性圆柱销 Spring - Type Straight Pins - Coiled, Light Duty
35	[德标] DIN EN 28748 - 1992	重型卷制弹性圆柱销 Spring-type straight pins - coiled, heavy duty
36	[德标] DIN EN ISO 8748 - 2007	重型卷制弹性圆柱销 Spring-Type Straight Pins – Coiled, Heavy Duty 供应商(2)
37	[德标] DIN EN ISO 8750 - 2007	卷制弹性圆柱销—标准负荷 Spring-Type Straight Pins - Coiled, Standard Duty 供应商(4)
38	[汽标] QC /T 622 - 1999	螺旋弹性销 Coiled spring pins
39	[美标] ASME B 18.8.2 - 2020	卷制弹性圆柱销【Table 9 -2】 Coiled-Type Spring Pins 供应商(1)
40	[美标] ASME B 18.8.2 - 2000 (R2010)	卷制弹性圆柱销【Table 11】 Coiled-Type Spring Pins 供应商(1)
41	[英标] BS EN 28748 - 1992	重型卷制弹性圆柱销 Spring-type straight pins - coiled, heavy duty

注：技术数据仅供参考，以官方原件为准！

弹性圆柱销 卷制 轻型 DIN EN ISO 8751 - 2007

技术条件和引用标准

引用参考

弹性圆柱销卷制轻型 DIN EN ISO 8751 - 2007