短周期弧焊焊接螺柱 Q 114
| 选择规格尺寸 点击↓ M3 M4 M5 M6 M8 M10 |
尺寸单位:
mm |
|
|
|||||||||||||||||||||||||||||||||||||||||
|
|
| ①,当焊接钢板厚度 ≥ 2mm时，焊接时间可以大于60ms，7°角度可以增至14°。 |
采用标准
技术条件和引用标准
|
|
||||||||||||||||||||||||||||||||||||||||
告诉我在“易紧通”看到，将给您优惠
21211537
登陆后可见类似标准及供货信息
| 1 |
|
[国标] GB /T 902.2 (PD) - 2010 |
PD型电弧焊用焊接螺柱 Threaded studs for drawn arc stud welding with ceramic ferrule-PD style 供应商(2) |
| 2 |
|
[国标] GB /T 902.2 (RD) - 2010 |
RD型电弧焊用焊接螺柱 Threaded Studs For Drawn Arc Stud Welding With Ceramic Ferrule-RD Type 供应商(2) |
| 3 |
|
[国标] GB /T 902.1 - 2008 |
手工焊用焊接螺柱 Weld Studs For Manual Welding 供应商(4) |
| 4 |
|
[国标] GB /T 902.3 (PT) - 2008 |
PT型焊接螺柱 Weld Studs For Capacitor Discharge Welding - Type PT 供应商(4) |
| 5 |
|
[国标] GB /T 902.1 - 1989 |
手工焊用焊接螺柱 Weld studs for manual welding 供应商(4) |
| 6 |
|
[国标] GB /T 902.2 - 1989 |
机动弧用焊接螺柱 Weld studs for arc welding 供应商(2) |
| 7 |
|
[国标] GB /T 902.3 (PT) - 1989 |
储能焊用焊接螺柱 Weld studs for capacitor discharge welding 供应商(4) |
| 8 |
|
[德标] DIN 525 - 2009 |
焊接螺柱 Weld studs |
| 9 |
|
[德标] DIN 34828 - 2005 |
单头焊接螺柱 Welding Studs For Turnbuckles |
| 10 |
|
[德标] DIN 32500 (-5)1991 |
气体保护焊焊接柱 快速螺柱焊接用带凹槽螺柱 带凸肩的螺柱(GK) Studs For Drawn Arc Stud Welding - Threaded Studs With Shoulder, Short Cycle Processes, GK |
| 11 |
|
[德标] DIN 525 - 1986 |
焊接螺柱 Weld studs |
| 12 |
|
[国际] ISO 13918 (MD) - 2017 |
MD型，近全螺纹螺柱 Arc Stud Welding - Virtually Fully -Threaded Stud - Type MD 供应商(1) |
| 13 |
|
[国际] ISO 13918 (PD) - 2017 |
PD型，部分螺纹（半牙）螺柱 Arc Stud Welding - Partially Threaded Stud - Type PD 供应商(1) |
| 14 |
|
[国际] ISO 13918 (RD) - 2017 |
RD型，带缩杆的螺纹螺柱 Arc Stud Welding - Threaded Stud With Reduced Shaft - Type RD 供应商(1) |
| 15 |
|
[国际] ISO 13918 (ID) - 2017 |
ID型，内螺纹焊接螺柱 Arc Stud Welding - Stud With Internal Thread - Type ID 供应商(1) |
| 16 |
|
[国际] ISO 13918 (PT) - 2017 |
PT型，螺纹焊接螺柱 Stud Welding With Tip Ignition - Threaded Stud - Type PT 供应商(2) |
| 17 |
|
[国际] ISO 13918 (PD) - 1998 |
PD型，螺纹螺柱 Threaded studs(PD) 供应商(1) |
| 18 |
|
[国际] ISO 13918 (RD) - 1998 |
RD型，带缩杆的螺纹螺柱 Threaded stud with reduced shaft(RD) 供应商(1) |
| 19 |
|
[国际] ISO 13918 (PT) - 1998 |
PT型，螺纹焊接螺柱 Threaded stud(PT) 供应商(2) |
| 20 |
|
[国际] ISO 13918 (UD) - 2017 |
UD型，无螺纹螺柱 Arc Stud Welding - Unthreaded Stud - Type UD |
| 21 |
|
[国际] ISO 13918 (PS) - 2017 |
PS型，带法兰的螺纹螺柱 Short-cycle Drawn Arc Stud Welding - Threaded Stud With Flange - Type PS |
| 22 |
|
[国际] ISO 13918 (US) - 2017 |
US型，无螺纹螺柱 Short-cycle Drawn Arc Stud Welding - Unthreaded Stud - Type US |
| 23 |
|
[国际] ISO 13918 (IS) - 2017 |
IS型，内螺纹焊接螺柱 Short-cycle Drawn Arc Stud Welding - Stud With Internal Thread - Type IS |
| 24 |
|
[国际] ISO 13918 (UT) - 2017 |
UT型，无螺纹焊接螺柱 Stud Welding With Tip Ignition - Unthreaded Stud - Type UT |
| 25 |
|
[国际] ISO 13918 (IT) - 2017 |
IT型，带内螺纹螺柱 Stud Welding With Tip Ignition - Stud With Internal Thread - Type IT |
| 26 |
|
[国际] ISO 13918 (UD) - 1998 |
UD型，无螺纹螺柱 Unthreaded studs(UD) |
| 27 |
|
[国际] ISO 13918 (FD) - 1998 |
FD型，带法兰的螺纹螺柱 FD Weld screws |
| 28 |
|
[国际] ISO 13918 (UT) - 1998 |
UT型，无螺纹螺柱 Unthreaded stud for arc stud welding(UT) |
| 29 |
|
[国际] ISO 13918 (IT) - 1998 |
IT型，内螺纹焊接螺柱 Stud with internal thread for arc stud welding(IT) |
| 30 |
|
[汽标代号] Q 110 |
手工焊接用焊接螺柱 Weld studs for manual welding |
| 31 |
|
[汽标] QC /T 869 - 2011 |
短周期弧焊焊接螺柱 Short-Cycle Drawn Arc Welding Studs 供应商(1) |
| 32 |
|
[汽标] QC /T 857 - 2011 |
焊接螺柱 Weld Studs |
注：技术数据仅供参考，以官方原件为准！
© 易紧通 服务热线：4006-164580（免长途费）