会员中心 | English | 繁體中文

铁路车辆 A级沉头侧切口螺钉/螺母 NF F 03-006 (notch) - 1983

选择规格尺寸点击↓

NF F 03-006 (notch) - 1983 铁路车辆 A级沉头侧切口螺钉/螺母

尺寸单位: mm

法国NF F03-006 (notch) - 1983 NF03-006 03- 铁路车辆 A级沉头侧切口螺钉/螺母

扫一扫分享

公差公制螺纹极限尺寸米/英制螺纹对照

螺纹尺寸
d

P	螺距
d₁	最大值
d₁	最小值
d_k	最大值
d_k	最小值
k	最大值
k	最小值
f	≈
d_s	最大值
d_s	最小值
b	最大值
b	最小值
b₁	最大值
b₁	最小值
d_p	最大值
d_p	最小值
g	最大值
g	最小值
R	≈
r	最大值
L₁	最大值
L₁	最小值

0.5	0.7	0.8	1	1.25
5	6	7	8	10
4.88	5.88	6.5	7.5	9.5
7.3	9.3	11.3	13.3	17
6.9	8.9	10.9	12.9	16.5
1.6	2.2	2.8	3.2	4.2
/	/	/	2.8	3.8
0.8	1.2	1.4	1.7	2
3	4	5	6	8
2.5	3.3	4.2	5.4	6.8
5.3	7.36	8.36	9.36	11.43
5	7	8	9	11
6	8.5	10	11.5	14
5.7	8.14	9.64	11.07	13.57
2	2.5	3.5	4	5.5
1.75	2.25	3.2	3.7	5.2
1.75	1.75	2.25	2.75	3.25
1.5	1.5	2	2.5	3
8.5	9.5	12	13.5	19
0.8	1	1.3	1.5	2
9.22	11.27	13.27	15.27	19.33
9	11	13	15	19

Clamping

技术条件和引用标准

材料

钢

不锈钢

有色金属

螺纹	公差
	标准
机械性能	等级
	标准
公差	产品等级
	标准
表面处理

6H/6g
NF E 03-001，NF E 03-014
螺钉：6.8 螺母：6	A2-70	协议
螺钉：NF E 25-100 螺母：NF E 25-400
A
NF E 27-021
无涂层电镀：NF E 27-016 其他涂层：E 27-018	不经处理 Clean and bright	协议

引用参考

GB /T 1172 - 1999

黑色金属硬度及强度换算值

GB /T 5267.1 - 2002

镀锌、镀镍、镀镉、复合镀等层镀层盐雾腐蚀的防护性能

GB /T 193 - 2003

普通螺纹（一般用途米制螺纹）- 直径与螺距系列 (ISO 261: 1998, MOD)

GB /T 3106 - 2016

紧固件 - 螺栓、螺钉和螺柱 - 公称长度和螺纹长度 (ISO 888:2012, MOD)

GB /T 3 - 1997

普通螺纹收尾、肩距、退刀槽和倒角 (ISO 3508:1976 / ISO 4755:1983)

GB /T 5779.1 - 2000

紧固件表面缺陷 - 螺栓、螺钉和螺柱 - 一般要求

GB /T 5779.3 - 2000

紧固件表面缺陷 - 螺栓、螺钉和螺柱 - 特殊要求

类似标准及供货信息

1	[国标] GB /T 69 - 2016	开槽半沉头螺钉 Slotted Raised Countersunk Head Screws 供应商(1)
2	[国标] GB /T 69 - 2000	开槽半沉头螺钉 Countersunk Slotted Raised Head Screws (Common Head Style) 供应商(1)
3	[国标] GB 69 - 1985	开槽半沉头螺钉 Slotted Raised Countersunk Head Screws 供应商(1)
4	[国标] GB 949 - 1988	开槽半沉头不脱出螺钉 Slotted Raised Countersunk Head Screws With Waisted Shank
5	[美标] IFI 513 - 1982	米制开槽半沉头机械螺钉 Table 4 Metric Slotted Oval Countersunk Head Machine Screws
6	[德标] DIN 964 - 1990	开槽半沉头螺钉 Slotted Raised Countersunk Head Screws 供应商(2)
7	[德标] DIN 924 - 2012	开槽半沉头圆柱端螺钉 Slotted Raised Countersunk Head Screws With Dog Point
8	[德标] DIN 924 - 2006	开槽半沉头圆柱端螺钉 Slotted Raised Countersunk Head Screws With Dog Point
9	[国际] ISO 2010 - 2011	一字槽半沉头螺钉(普通头型).产品等级A Slotted Raised Countersunk Head Screws - Product Grade A 供应商(1)
10	[国际] ISO 2010 - 1994	开槽半沉头螺钉(通用头型) 产品等级A级 Countersunk slotted raised head screws (common head style); product grade A 供应商(1)
11	[日标] JIS B 1101 - 2017	开槽半沉头螺钉表10 Slotted Raised Countersunk Head Screws - Table 10
12	[日标] JIS B 1101 - 2017	开槽半沉头螺钉表JA.5 Slotted Raised Countersunk Head Screws - Table JA.5
13	[日标] JIS B 1116 - 2009	精密机械用开槽半沉头螺钉 Slotted Raised Countersunk Head Screws For Fine Mechanics
14	[日标] JIS B 1101 - 1996	开槽半沉头螺钉 [Attached Table 4] Slotted Raised Countersunk Head Screws [Attached Table 4]
15	[日标] JIS B 1101 - 1996	开槽半沉头螺钉 [Annex Attached Table 3] Slotted Raised Countersunk Head Screws [Annex Attached Table 3]
16	[美标] ASME/ANSI B 18.6.3 - 2010	开槽半沉头螺钉Table7 Slottted Oval Countersunk Head Machine Screws
17	[美标] ASME/ANSI B 18.6.3 (T11) - 2010	80°开槽半沉头清根螺钉Table11 80° Slotted undercut oval countersunk head machine screws
18	[美标] ASME/ANSI B 18.6.7M - 1998	米制开槽半沉头螺钉Table6 Metric slotted raised countersunk head screws
19	[法国] NF E 25-124 - 1994	开槽半沉头螺钉 Slotted Raised Countersunk Head Screws - Product Grade A
20	[法国] NF F 03-004 (FB) - 1983	铁路车辆半沉头侧切口机械螺钉 Railway rolling stock Grade A raised countersunk notched head machine
21	[法国] NF F 03-006 (slot) - 1983	铁路车辆 A级开槽半沉头螺钉/螺母 Railway rolling stock Grade A Slotted raised countersunk head screws/nuts
22	[英标] BS 1981 - 1991	开槽半沉头螺钉(短的)Table10 Slottted Oval Countersunk Head Screws： Short Length
23	[英标] BS 1981 - 1991	开槽半沉头螺钉Table8 Slotted Raised Countersunk Head Machine Screws
24	[英标] BS 4183 (T3) - 1967	开槽半沉头机械螺钉 Slotted raised countersunk head machine screws. Metric series
25	[英标] BS 450 - 1958	英制开槽半沉头螺钉 - B.S.W. & B.S.F. 螺纹 [Table 3] Slotted 90° Raised-Countersunk Head Screws with B.S.W. & B.S.F. Threads [Table 3]
26	[澳标] AS /NZS 1427 - 1996	米制开槽半沉头螺钉 [Table 2] ISO metric slotted raised countersunk head screws [Table 2]
27	[台湾] CNS 9679 - 1982	精密机械用开槽半沉头螺钉 Slotted Raised Countersunk Head Screws For Fine Mechanics
28	[台湾] CNS 4414 - 1981	开槽半沉头螺钉 Slotted Raised Countersunk Head Screws - Product Grade A
29	[俄标] GOST 17474 - 1980	开槽半沉头螺钉 A级和B级 Raised countersunk head screws （Slotted）, product grades A and B
30	[韩标] KS B 1021 (T6) - 2012 (R2022)	开槽半沉头螺钉【Table 6】 Slotted Raised Countersunk Head Screws【Table 6】
31	[德标] DIN EN ISO 2010 - 1994	开槽半沉头螺钉(通用头型) - 产品等级A级 Slotted Raised Countersunk Head Screws (Common Head Style) - Product Grade A 供应商(2)
32	[美标] ASME B 18.6.3 (T7) - 2013	82° 开槽半沉头机械螺钉 [Table 7] (ASTM F837 / F468) 82° Slotted Oval Countersunk Head Machine Screws [Table 7] (ASTM F837 / F468)
33	[美标] ASME B 18.6.3 (T11) - 2013	82° 开槽半沉头清根机械螺钉 [table 11] (ASTM F837 / F468) 82° Slotted Undercut Oval Countersunk Head Machine Screws [table 11] (ASTM F837 / F468)
34	[航天] QJ 2388 - 1992	开槽半沉头螺钉 Slotted countersunk raised head screws
35	[航空] HB 1- 209 - 1995	90°开槽半沉头螺钉 90° Countersunk slotted raised head screws

注：技术数据仅供参考，以官方原件为准！

铁路车辆 A级 沉头侧切口螺钉/螺母 NF F 03-006 (notch) - 1983

技术条件和引用标准

引用参考

铁路车辆 A级沉头侧切口螺钉/螺母 NF F 03-006 (notch) - 1983