index
logo

铝帽铁芯开口型圆头抽芯铆钉 ISO 15977 - 2002

选择规格尺寸 点击↓

Φ2.4

Φ3

Φ3.2

Φ4

Φ4.8

Φ5

Φ6

Φ6.4

ISO  15977 - 2002 铝帽铁芯开口型圆头抽芯铆钉

尺寸单位: mm
国际ISO 15977 - 2002 ISO15977 15977ISO 铝帽铁芯开口型圆头抽芯铆钉
ISO  15977 - 2002 铝帽铁芯开口型圆头抽芯铆钉
扫一扫分享
公称长度L
公称直径
d
Φ2.4 Φ3 Φ3.2 Φ4 Φ4.8 Φ5 Φ6 Φ6.4
d 最大值
最小值
dk 最大值
最小值
k 最大值
d1 最大值
L1 最小值
b 最大值
最小剪切载荷(N)-L级
最小剪切载荷(N)-H级
最小拉力载荷(N)-L级
最小拉力载荷(N)-H级
最大钉芯断裂载荷(N)
钉头保持试验载荷/N
2.48 3.08 3.28 4.08 4.88 5.08 6.08 6.48
2.25 2.85 3.05 3.85 4.65 4.85 5.85 6.25
5.0 6.3 6.7 8.4 10.1 10.5 12.6 13.4
4.2 5.4 5.8 6.9 8.3 8.7 10.8 11.6
1 1.3 1.3 1.7 2 2.1 2.5 2.7
1.55 2 2 2.45 2.95 2.95 3.4 3.9
25 25 25 27 27 27 27 27
L(max)+3.5 L(max)+3.5 L(max)+4 L(max)+4 L(max)+4.5 L(max)+4.5 L(max)+5 L(max)+5.5
250 400 500 850 1200 1400 2100 2200
350 550 750 1250 1850 2150 3200 3400
350 550 700 1200 1700 2000 3000 3150
550 850 1100 1800 2600 3100 4600 4850
2000 3000 3500 5000 6500 6500 9000 11000
10 15 15 20 25 25 30 50
推荐的铆接范围
- - - - - - - -
①,材料:铝合金(AlA)及钢(St)为铆钉主体和钉芯材料, 并应具有第5条规定的机械性能(见原件表3)。材料规格由制造商决定。
替代列表
暂无
等效标准
国标 GB 国际 ISO 德标 DIN
GB /T 12618.1
ISO 15977
DIN EN ISO 15977
以上有部分标准可能为近似等效,如有异议以标准原件为准

技术条件和引用标准

材料
Mandrel push-out resistance
表面处理
表面缺陷
验收及包装
Blind rivets in accordance with this International Standard shall have a rivet body made of of aluminium alloy (AlA) and a mandrel made of steel (St).
Material specification is at the discretion of the manufacturer.
The load to push out the mandrel shall exceed 10 N when tested in accordance with ISO 14589.
The surface of rivet body and mandrel shall be zinc plated 5 μm minimum in accordance with ISO 4042 measuredat the rivet head.
The chromate conversion coating shall be c2C in accordance with ISO 4520:1981.
The complete finish designation is then Fe/Zn5c2C.
Rivets shall be free from burrs and harmful defects and shall have well formed heads and shanks.
After setting, rivets shall not show evidence of cracking when viewed at 5× magnification.
ISO 3269
告诉我在“易紧通”看到,将给您优惠
联系人:诸葛鸿满 点击这里给我发消息2880137050 点击这里给我发消息2880137059   移动电话: 18916049888     电话:021-59742477/59740118 Email: 登陆后可见
材质:不锈钢、铝、碳钢;规格:齐全;表面处理:根据客户要求
联系人:吴铁洲   移动电话: 15906744333     电话:0574-63313978 Email: 登陆后可见
材料:铜、铝、铁、不锈钢;规格:齐全;表面处理:按照客户的要求
联系人:励晨莹 点击这里给我发消息469369214   移动电话: 15158363879     电话:15158363879     微信号:15158363879 Email: 登陆后可见
材质:不锈钢,全铁,铝等;规格尺寸齐全;表面处理可根据客户需求,现货充足。
类似标准及供货信息
1 开口型平圆头抽芯铆钉 10、11级 [国标]
GB /T 12618.1 - 2006
开口型平圆头抽芯铆钉 10、11级
Open End Blind Rivets With Break Pull Mandrel And Protruding Head―Property Class 10,11
供应商(6)
2 开口型平圆头抽芯铆钉 30级 [国标]
GB /T 12618.2 - 2006
开口型平圆头抽芯铆钉 30级
Open End Blind Rivets With Break Pull Mandrel And Protruding Head-Property Class 30
供应商(6)
3 开口型平圆头抽芯铆钉 12级 [国标]
GB /T 12618.3 - 2006
开口型平圆头抽芯铆钉 12级
Open End Blind Rivets With Break Pull Mandrel And Protruding Head-Property Class 12
供应商(6)
4 开口型平圆头抽芯铆钉 51级 [国标]
GB /T 12618.4 - 2006
开口型平圆头抽芯铆钉 51级
Open End Blind Rivets With Break Pull Mandrel And Protruding Head―Property Class 51
供应商(6)
5 开口型平圆头抽芯铆钉 20.21.22级 [国标]
GB /T 12618.5 - 2006
开口型平圆头抽芯铆钉 20.21.22级
Open End Blind Rivets With Break Pull Mandrel And Protruding Head-Property Class 20,21,22
供应商(6)
6 开口型平圆头抽芯铆钉 40、41级 [国标]
GB /T 12618.6 - 2006
开口型平圆头抽芯铆钉 40、41级
Open End Blind Rivets With Break Pull Mandrel And Protruding Head-Property Class 40,41
供应商(6)
7 开口型扁圆头抽芯铆钉 [国标]
GB 12618 - 1990
开口型扁圆头抽芯铆钉
Mushroom Head Break Mandrel Blind Rivets
供应商(6)
8 开口型圆头抽芯铆钉 [美标]
IFI 114 - 2003
开口型圆头抽芯铆钉
Regular and large dome head style break mandrel blind rivets
供应商(2)
9 轻型开口圆头抽芯铆钉 [美标]
IFI 117 - 2003
轻型开口圆头抽芯铆钉
Regular And Large Dome Head Pull Through Mandrel Blind Rivets
供应商(1)
10 米制开口型扁圆头抽芯铆钉 [美标]
IFI 505 - 1999
米制开口型扁圆头抽芯铆钉
Metric Mushroom Head Break Mandrel Blind Rivets
供应商(1)
11 米制开口圆头抽芯铆钉 [美标]
IFI 520 - 1999
米制开口圆头抽芯铆钉
Metric Regular And Large Protruding Head Pull Through Mandrel Blind Rivets
供应商(1)
12 米制结构型开口平圆头抽芯铆钉 [美标]
IFI 551 - 1999
米制结构型开口平圆头抽芯铆钉
Metric Regular And Large Protruding Head Style Structral Flush Break Pull Mandrel Self-Plugging Blind Rivets
供应商(1)
13 开口型圆头抽芯铆钉 Table 1 [美标]
IFI 114 - 1986
开口型圆头抽芯铆钉 Table 1
Regular And Large Protruding Head Style Break Mandrel Blind Rivets
供应商(2)
14 开口型平圆头抽芯铆钉 [德标]
DIN 7337 (A) - 1991
开口型平圆头抽芯铆钉
Break manderl blind rivets ,flat head
供应商(3)
15 铁帽铁芯开口型圆头抽芯铆钉 [国际]
ISO 15979 - 2002
铁帽铁芯开口型圆头抽芯铆钉
Open End Blind Rivets With Break Pull Mandrel And Protruding Head - St/St
供应商(4)
16 铝帽铝芯开口型圆头抽芯铆钉 [国际]
ISO 15981 - 2002
铝帽铝芯开口型圆头抽芯铆钉
Open End Blind Rivets With Break Pull Mandrel And Protruding Head - AIA/AIA
供应商(4)
17 全不锈钢开口型圆头抽芯铆钉 [国际]
ISO 15983 - 2002
全不锈钢开口型圆头抽芯铆钉
Open End Blind Rivets With Break Pull Mandrel And Protruding Head - A2/A2
供应商(4)
18 开口型圆头抽芯铆钉 [国际]
ISO 16582 - 2002
开口型圆头抽芯铆钉
Open End Blind Rivets With Break Pull Mandrel And Protruding Head - Cu/St Or Cu/Br Or Cu/SSt
供应商(3)
19 开口型圆头抽芯铆钉 [国际]
ISO 16582
开口型圆头抽芯铆钉
Open end blind rivets with break pull mandrel and round head - Cu/St Or Cu/Br Or Cu/SSt
供应商(3)
20 开口型盘头抽芯铆钉 [国际]
ISO 16584 - 2002
开口型盘头抽芯铆钉
Open End Blind Rivets With Break Pull Mandrel And Protruding Head - NiCu/St or NiCu/SSt
21 开口型扁圆头抽芯铆钉 [汽标代号]
Q 440
开口型扁圆头抽芯铆钉
Mushroom head break mandrel blind rivets
供应商(3)
22 开口型平圆头抽芯铆钉 10、11级 [汽标代号]
Q 440B
开口型平圆头抽芯铆钉 10、11级
Open End Blind Rivets With Break Pull Mandrel And Protruding Head―Property Class 10,11
供应商(3)
23 开口型平圆头抽芯铆钉 30级 [汽标代号]
Q 440B (T19)
开口型平圆头抽芯铆钉 30级
Open End Blind Rivets With Break Pull Mandrel And Protruding Head-Property Class 30
供应商(3)
24 塑料件用开口型圆头抽芯铆钉 [汽标代号]
Q 449
塑料件用开口型圆头抽芯铆钉
Open End Blind Rivets With Break Pull Mandrel And Protruding Head For Plastic Parts
25 米制开口型圆头抽芯铆钉 [Table 1] [美标]
ASME/ANSI B 18.30.1M - 2000 (R2005)
米制开口型圆头抽芯铆钉 [Table 1]
Regular and Large Protruding Head Style Break Mandrel Blind Rivets (Metric Series) [Table 1]
26 开口型扁圆头抽芯铆钉 [意大利]
UNI 9200 (A) - 1994
开口型扁圆头抽芯铆钉
Open End Blind Rivets With Break Pull Mandrel And Protruding Head
供应商(1)
27 铁帽铁芯开口型圆头抽芯铆钉 [法国]
NF E 25-716 - 2003
铁帽铁芯开口型圆头抽芯铆钉
Open End Blind Rivets With Break Pull Mandrel And Protruding Head - St/St
供应商(1)
28 全不锈钢开口型圆头抽芯铆钉 [法国]
NF E 25-720 - 2003
全不锈钢开口型圆头抽芯铆钉
Open End Blind Rivets With Break Pull Mandrel And Protruding Head - A2/A2
供应商(1)
29 铝帽铁芯开口型圆头抽芯铆钉 [法国]
NF E 25-714 - 2003
铝帽铁芯开口型圆头抽芯铆钉
Open End Blind Rivets With Break Pull Mandrel And Protruding Head - AIA/St
30 铝帽铝芯开口型圆头抽芯铆钉 [法国]
NF E 25-718 - 2003
铝帽铝芯开口型圆头抽芯铆钉
Open End Blind Rivets With Break Pull Mandrel And Protruding Head - AIA/AIA
31 铜帽铁芯开口圆头抽芯铆钉 [法国]
NF E 25-722 - 2003
铜帽铁芯开口圆头抽芯铆钉
Open End Blind Rivets With Break Pull Mandrel And Protruding Head - Cu/St Or Cu/Br Or Cu/SSt
32 NiCu帽铁芯开口型盘头抽芯铆钉 [法国]
NF E 25-724 - 2003
NiCu帽铁芯开口型盘头抽芯铆钉
Open End Blind Rivets With Break Pull Mandrel And Protruding Head - NiCu/St or NiCu/SSt
33 圆头拉花型铆钉(替代YJT 1047) [企标]
YJT 8010
圆头拉花型铆钉(替代YJT 1047)
Round head Peel type rivets(YJT 1047)
供应商(3)
34 哈克洛克双锁抽芯铆钉 [企标]
YJT 8026
哈克洛克双锁抽芯铆钉

供应商(1)
35 哈克宝马抽芯铆钉 [企标]
YJT 8027
哈克宝马抽芯铆钉

供应商(1)
36 圆头沟槽型抽芯铆钉 [企标]
YJT 8028
圆头沟槽型抽芯铆钉

供应商(1)
37 开口型圆头抽芯铆钉—铝帽铁芯 [德标]
DIN EN ISO 15977 - 2011
开口型圆头抽芯铆钉—铝帽铁芯
Open End Blind Rivets With Break Pull Mandrel And Protruding Head - AIA/St
供应商(3)
38 铁帽铁芯开口型圆头抽芯铆钉 [德标]
DIN EN ISO 15979 - 2003
铁帽铁芯开口型圆头抽芯铆钉
Open End Blind Rivets With Break Pull Mandrel And Protruding Head - St/St
供应商(3)
39 铝帽铝芯开口型圆头抽芯铆钉-AIA/AIA [德标]
DIN EN ISO 15981 - 2003
铝帽铝芯开口型圆头抽芯铆钉-AIA/AIA
Open End Blind Rivets With Break Pull Mandrel And Protruding Head - AIA/AIA
供应商(3)
40 全不锈钢开口型圆头抽芯铆钉 [德标]
DIN EN ISO 15983 - 2003
全不锈钢开口型圆头抽芯铆钉
Open End Blind Rivets With Break Pull Mandrel And Protruding Head - A2/A2
供应商(3)
41 开口型圆头抽芯铆钉 [德标]
DIN EN ISO 16582 - 2003
开口型圆头抽芯铆钉
Open End Blind Rivets With Break Pull Mandrel And Protruding Head - Cu/St Or Cu/Br Or Cu/SSt
供应商(3)
42 开口型盘头抽芯铆钉 [德标]
DIN EN ISO 16584 - 2003
开口型盘头抽芯铆钉
Open End Blind Rivets With Break Pull Mandrel And Protruding Head - NiCu/St or NiCu/SSt
供应商(3)
43 塑料用开口型圆头抽芯铆钉 [汽标]
QC /T 892 - 2011
塑料用开口型圆头抽芯铆钉
Open End Blind Rivets With Break Pull Mandrel And Protruding Head For Plastic Parts
44 铝合金平圆头抽芯铆钉 [航空]
HB 8003 - 2022
铝合金平圆头抽芯铆钉
Pan head break mandrel blind rivets, in aluminum alloy material
注:技术数据仅供参考,以官方原件为准!
© 易紧通 服务热线:4006-164580(免长途费)